SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
|
Our Price: $520.6 CALL FOR AVAILABILITY
|
After market non-oem Stainless Steel head light bezel rings. Excellent restoration piece. 9.25" OD 7.25" ID.
APPLICATION DETAILS:
1961-71 Scout-very close to original look
1941-49 K/KB- Fit all models with close to original look
|
Our Price: $39.95 EACH
|
***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD***
This is the original International Harvester red color.
Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.
|
Our Price: $80.08 each
|
Windshield top to frame seal, also known as the upper windshield seal, this has a 7 bolt pattern. It works for 1965-71 Scouts.
|
Our Price: $41.95
|
Gasket that goes on the top of your Scout 80, Scout 800 gas tank. Need one per gas tank. This gasket is only used on original metal fuel tanks.
|
Our Price: $11.42 each
|
The Scout II shift cable controls the gear shifting for Scout II vehicles equipped with automatic transmissions. Replace your worn or broken shift cable to get that Scout back on the road. 36\"
|
Our Price: $121.66 each
|
Hub and rotor for Scout II with front disc brakes (2WD & 4WD) and for 1974-75 4x4 pickups and Travelalls.
These come complete with new hubs, new discs, new studs, and new bearing races.
|
Our Price: $224.26 each
|
Pin; straight interior handle for window and door.
Holds interior handles on the inside of door.
|
Our Price: $10.17 per pin
|
Door Check Strap Mounting Bracket! Nickel plated bracket, secures door check strap to the door.
|
Our Price: $5.85 each
|
Scout 80/800 door check straps made as exact replicas of the factory part. Available in black, and look great on any door. Sold Each.
|
Our Price: $20.59 each
|
So close to original that it\'s difficult to tell the difference. Many states do not require a front plate. Because of this, we have deleted the holes for the license plate.
Same original thickness and original mounting holes. Super close reproduction of factory original.
In stock now.
Fits bot
|
Our Price: $483.97 each
|
Hose connects the plastic or metal fuel filler neck to the fuel tank, and is a direct replacement for the original hose.
This is a nice, industrial, heavy duty hose. (Be careful of the heavy metal wires embedded in the tubing.)
|
Our Price: $38.4 each
|
This kit includes the two hoses that connect the defroster vents in your truck.
|
Our Price: $39.95 each
|
Fuel sender gasket o-ring for original steel fuel tanks. If you have an aftermarket polyethylene tank, you need SP19180.
|
Our Price: $7.08 each
|
Original type temperature sending units screw into the intake manifold near the water jacket, and accept the stock female spade connector. Pipe thread measures 1/2" using ruler.
|
Our Price: $52.63 each
|
This cap will fit and look great on any Scout II, Scout 80/800, 50's and 60's IH Pickup / Travelall. You will love it.
|
Our Price: $27.81 each
|
Brand new interior door handle for Scout 80 and Scout 800.
Exact reproduction of the original handle. Can also be drilled and used as a replacement for bolt on style handles used on some Scouts.
|
Our Price: $12.84
|
If you have an A, B, or C-series Travelall or pickup, and cannot find blades for it, or yours have gotten so bad over the years that you cannot use it anymore, we have the correct replacement blades for you. These are new rubber blades and the bracket or holder that attaches it to the arm. The bla
|
Our Price: $42.81 each
|
In stock now! 435317c1
|
Our Price: $9.95 ECH
|
Newly manufactured "All Wheel Drive" emblem for Scout 80/800.
|
Our Price: $75.62 each
|
Gasket kit for exterior door handles used on Scout II, and D-Series Pickup and Travelall. Rubber gaskets keep water out of the door and prevent contact scratching between handle and door. Kit includes 4 gaskets. (2 large, 2 small) (IH# 484575C1, 484576C1, 484574C1, 484573C1)
484575C1 Left, 484576C
|
Our Price: $21.12 - $61.53 each
|
Automatic Shift Dial Plate
Park, Reverse, Neutral, Drive, Low Plate
Automatic gear indicator comes as pair - blank and lettered plates
Made in the USA
![](\"/images/usaflag-backed.gif\")
|
Our Price: $58.34 each
|
Our heavy duty antennas are low cost but high quality. These antennae are just like what comes on a brand new International overland truck. Here are some basic features:
Stainless Steel
Spring Loaded
31" Mast
60" Cable
Universal Fit
|
Our Price: $57.29 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|
This is the perfect screw to use on all IH valve covers. This will fix a lot of your leaks.
|
Our Price: $12.56 for 6 Bolts
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
| |
