SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

This is a plastic Sheet metal screw nut used in IH head lights, like head light bezels. Also can hold your head light bezel on to your grille.
Fits a #6 Screw and a 5/16" square hole
|
Our Price: $1.48 each
|

This is the front parking brake cable for all Scout II except those with diesel engines. If you have a diesel engine, see SP13718.
Most cables have either fused with rust from road salt, or have been frayed from abuse. Not only is it dangerous to not have a functional emergency brake, but it is il
|
Our Price: $172.89 each
|

This is brand new vented fuel cap to fit all International trucks.
This also fits other trucks too, as well as tractors and industrial engine fuel tanks.
|
Our Price: $21.26 each
|

This fits all IH motors, including 152, 196, 266, 304, 345, and 392. Make those persistent oil leaks disappear!
Gaskets may come in cork or rubber, depending on availability.
Not sold in pairs
If you have a V8, order two
|
Our Price: $16.95 Each
|

Newly manufactured "All Wheel Drive" emblem for Scout 80/800.
|
Our Price: $75.62 each
|

This is a NEW Rubber bumper for your adjustable hood stop. You will be able to close your hood with out damaging your paint and it will also stop your hood from fluttering when you're driving over 30 miles per hour.
|
Our Price: $13.52 Each
|

This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.4 CALL FOR AVAILABILITY
|

The Scout II shift cable controls the gear shifting for Scout II vehicles equipped with automatic transmissions. Replace your worn or broken shift cable to get that Scout back on the road. 36\"
|
Our Price: $121.66 each
|

393250C2 - Most Scout II's with either 4 speed manual or automatic transmission use this transmission mount assembly. One side of the mount attaches to the transmission housing and the other side mounts to the cross member. This should also fit stock 1971-1974s with 3spd or 4spd manuals.
|
Our Price: $71.56 each
|

Each kit of polyurethane bushings will service one axle and tighten up your ride quality while eliminating squeaks.
The overall length of these bushings is 2.25 inches, 1.25 outside diameter. this works with stock shackles or our aftermarket shackles.
|
Our Price: $97.98 each
|

These are new U-joints to fit the front axle shafts on Dana-44 open-knuckle front axles used in Scout II, Travelalls, and pickups, including 1000, 1100, 1200, 1010, 1110, 1210, 100, 150, and 200 4x4 chassis.
|
Our Price: $46.68 each
|

These are new shifter decals for your Scout 80s and Scout 800s with 3-speed transmissions.
|
Our Price: $12.95 each
|

"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|

This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|

Head light dimmer switch, floor mount. Fits Scout 80 and 800 plus all IHC models.
|
Our Price: $21.21 each
|

New turn signal switch for your 1971-1976 IH Scout II.
(Looking for that hard-to-find 77-80 Turn Signal Swith? We've got it! See "related parts" below)
|
Our Price: $79.96 each
|

395944C1, This little clip was used on just about all IH rigs. This little clip holds on many of your door seals. The earlier ones were metal and have now rusted away.
|
Our Price: $0.9 each
|

These are new plastic fan shrouds for Scout II. These are designed for use with V8 engines, and they will fit 4-cylinder motors too. These may or may not work with the inline engines (258, SD-33). If you have one of those engines, call us anyway to make sure.
|
Our Price: $202.77 each
|

This is a complete set of 9 new LED lights to replace your old incandescent bulbs. You know, the ones that seem to only burn out when you are giving a ride to your mother in-law that does not quite like you...yet.
SPEEDO:
2 Illumination LEDs
2 Turn Signal
1 4x4 Engage
1 E-brake
1 Brights
ALT/FUEL:
|
Our Price: $33.26 set of 9 bulbs and inserts/sockets
|

Includes wiring for indicator lights. Includes detailed directions. This harness is used to make wiring EASY for installing our Scout II gauge kit. product #sp13689. This harness is completely pre-wired and every wire is labeled. It is all ready to plug right into the original factory plastic gauge
|
Our Price: $226.1 each
|

Kit includes one spring for each door lock mechanism.
|
Our Price: $25.3 IN STOCK NOW! EACH
|

Hose connects the plastic or metal fuel filler neck to the fuel tank, and is a direct replacement for the original hose.
This is a nice, industrial, heavy duty hose. (Be careful of the heavy metal wires embedded in the tubing.)
|
Our Price: $38.4 each
|

Original type temperature sending units screw into the intake manifold near the water jacket, and accept the stock female spade connector. Pipe thread measures 1/2" using ruler.
|
Our Price: $52.63 each
|

All of the gas motors in all models of Scout and Scout II use these Champion brand spark plugs. We typically gap spark plugs to .035 when installing, which is very close to the Champion factory gap.
|
Our Price: $5.41 each
|

For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|

For #8 Screw.
|
Our Price: $1.44 each
|

This is a Scout II tail gate emblem that says "International". 8" X 1"
These have gotten very scarce for a long time, they are back in a brand new reproduction! 6 inches between pegs.
Tailgate
2754244R1
|
Our Price: $98.95 call for availability
|
|