SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|

***Scout II top door seal special, proudly made in the USA*** Scout II door felt and squeegee for resealing the top of door opening of Scout II doors. These are the real deal, your windows won't rattle and will look original.
You will need 2 kits.
481437C1, 395872c1, 395873c1 - Inner 481437c1, 39
|
Our Price: $72.37 each
|

New aftermarket round side view mirror. Same primitive design as the original, this mounts directly to the upper door hinges (there should be a threaded hole in the front surface of each hinge)..
-MIRROR HEAD ONLY-
|
Our Price: $133.45 EACH
|

This is a new knob for the hood release cable on the dashboard. This is the later version which was made of plastic, but can be used to replace the earlier metal knob too. Often these are completely missing, either because they split, or because the cable got stuck and the knob came off. If your
|
Our Price: $29.95 each
|

All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH blueprint specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6-cy
|
Our Price: $508.10 - $508.10 each
|

This valve seat retains the valve spring. these are used on all IH 4 and 8 cylinder engines.
|
Our Price: $11.76 each
|

Bet you didn't know you can replace that worn out ring gear on your flywheel! If your starter 'sings' to you every time you go to start your truck, you need to replace the ring gear. This is a much cheaper alternative to replacing the flywheel.
This is used on all flywheels used on the IH eng
|
Our Price: $106.59 each
|

Includes wiring for indicator lights. Includes detailed directions. This harness is used to make wiring EASY for installing our Scout II gauge kit. product #sp13689. This harness is completely pre-wired and every wire is labeled. It is all ready to plug right into the original factory plastic gauge
|
Our Price: $226.1 each
|

If you get your Scout out on some gravel and apply brake pressure you can determine if either the front or rear brakes are locking up too early. This adjustable proportioning valve allows you to fine tune the front to rear braking pressure.
|
Our Price: $67.72 each
|

Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
Made in the USA
393953c92 1971-1978
|
Our Price: $184.02 each
|

This clip replaces the original clip and spacer. It is made of a rigid plastic and will do the job as good as the original.
|
Our Price: $25.2 each
|

After market non-oem Stainless Steel head light bezel rings. Excellent restoration piece. 9.25" OD 7.25" ID.
APPLICATION DETAILS:
1961-71 Scout-very close to original look
1941-49 K/KB- Fit all models with close to original look
|
Our Price: $39.95 EACH
|

If your windows are not rolling up and down smoothly, this could be your answer. This new plastic strip holds and helps your window roll up and down smoothly. Reduces rattles in your doors.
Brand new window guide for Scout II, Traveler, and Terra 1971 to 1980. Comes with fastener kit, which include
|
Our Price: $81.92 Priced per pair
|

Brand-New IH Scout II Accelerator / Throttle Cable Part. This cable is 28-5/8" end to end.
This is the REAL DEAL IH Part. part 440983C1
73-75 6-232/258 engines
To fit the 1973-1978 Scout II with 304 / 345 V8.
This cable has a socket fitting on the carburetor end, and a ball on the gas pedal en
|
Our Price: $104.5 each
|

Our challenger type steering wheel has been tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Black foam cushion grip with matte black 3-spokes. 13-3/4" diameter, 2-1/4" dish.
Note : if you don't already have an after-market steering wheel, you w
|
Our Price: $161.75 each
|

These are the plastic pivot bushings or bearings used on Scout 80 and 800, Scout II, and D-series pickups and Travelalls without hydraulic clutches. These fit inside the end of the bellcrank (also known as the clutch relay lever or cross shaft) around the each of the round balls on the frame and th
|
Our Price: $48.67 each
|

Newly manufactured "All Wheel Drive" emblem for Scout 80/800.
|
Our Price: $75.62 each
|

This LED bulb replaces the side marker lamp in either the front or rear side marker of the Scout II, also works in the dash lamps.
|
Our Price: $11.88 each
|

2753948r1. Fits: 1966-1971 Scout 800, 800A, 800B
Die cast design like the original
Chrome plates and textured on the inside
Includes retaining clips
|
Our Price: $48.9
|

This mount is designed to replace the factory mount. It uses polyurethane and nylon bushings.
**This mount is intended for a Scout II with a 4 speed and T-19 transmission.
Made in the USA
|
Our Price: $49.9 each
|

A canister type Engine oil filter with a gasket for a Scout 80/800.
Scout engine oil filter
|
Our Price: $35.78 each
|

Kit includes:
2- green LEDs for turn signal indicator
1- red "brake failure"
1- amber/yellow "4x engage"
1- blue "high beam"
Chrome on steel body. These lights are not plastic and they will take a real beating.
Requires a 1/2" hole in dash. Made with LED's so they won't drain your battery.
|
Our Price: $32.92 each
|

This seal is made for the lower rear cab top. The original was poorly designed because it allowed the metal of the top to rub against the metal of the bulkhead in direct contact, destroying your paint. This is new and improved!
|
Our Price: $59.95 each
|

Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|

Fits a spring that is 1 7/8" wide. These are 7/8" outside diameter. Standard polyurethane bushings are an excellent suspension upgrade, as they tighten up squeaks and prevent spring damage.
Stock shackle bushings are not flanged and fit your stock suspension setup. Kit includes 6 bushings to serv
|
Our Price: $49.6
|

If you are trying to make your old Window regulator work and or if you have another from another year of scout and you want to reattatch your fan gear, this is the exact rivit that you need to rehab your Window regulator. Used on all IH's from 1940 to 1971
|
Our Price: $15.69 each
|

We need to know if you have a 60s or 70s scout. Includes 2 bolts,4 washers,2 nuts. Each scout requires 4 bolts for the front seat and 3 bolts for the back seat.
|
Our Price: $5.83 each
|
|