SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Restoration quality bumper stand-off brackets. Attention to detail makes a good restoration great! ****Priced per offset****.
Made in the USA
|
Our Price: $111.47 EACH
|
This travel top side window seal is a fantastic reproduction of the original. It fits great.
You'll notice that your original seal (or any you ever see on a travel top) has a seam in the center at the bottom of the window. This seal comes in a continuous loop but needs to be cut down slightly to 19
|
Our Price: $184.2 each
|
Sold Each. New tail light lenses for your Scout II 1972 to March 1978 or D-series pickup 1969 to 1975.
This lens will work with your original chrome or plastic housing. After 1978 they went to a plastic bonded housing.
For complete kit or other parts See Item SP20843
|
Our Price: $39.12 EACH
|
Our challenger type steering wheel has been tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Black foam cushion grip with matte black 3-spokes. 13-3/4" diameter, 2-1/4" dish.
Note : if you don't already have an after-market steering wheel, you w
|
Our Price: $161.75 each
|
these are the real deal!! Dash board light bulb sockets. Lights up heater, head light and wiper indicators, gauges, speedo. fits all IH trucks and Scouts!!
|
Our Price: $5.1 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
This part will connect a custom steering wheel to your old Scout. You will retain your horn as well as your turn signal cancel. IT WORKS! You cant get this anywhere else!
This is for a 1961-1971 Scout 80 or 800.
If you need this part for a Scout II, use SP16464
|
Our Price: $67.09 each
|
Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|
Hose connects the plastic or metal fuel filler neck to the fuel tank, and is a direct replacement for the original hose.
This is a nice, industrial, heavy duty hose. (Be careful of the heavy metal wires embedded in the tubing.)
|
Our Price: $38.4 each
|
This body mount kit is an extremely close reproduction of the original bushings used by International Harvester in the 1960s.
Every bump and curve has been reproduced in the smallest detail. These are not plastic washers repackaged to fool you into thinking that these are a body mount kit.
This
|
Our Price: $142.06 each
|
These are aftermarket rubber gaskets, sold in pairs to do 2 doors (2 small pieces, 2 large pieces). For 4 door trucks and Travelalls be sure to order two kits!
Scout 66-71 Scout 800 and 61-68 IH Pickup
(handle not included)
|
Our Price: $19.99 each
|
Water Temp Sender For Scout 2 With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old water temp sender with this new updated sender for the most accura
|
Our Price: $41.87 each
|
This is a new knob for the hood release cable on the dashboard. This is the later version which was made of plastic, but can be used to replace the earlier metal knob too. Often these are completely missing, either because they split, or because the cable got stuck and the knob came off. If your
|
Our Price: $29.95 each
|
A canister type Engine oil filter with a gasket for a Scout 80/800.
Scout engine oil filter
|
Our Price: $35.78 each
|
Fits a spring that is 1 7/8" wide. These are 7/8" outside diameter. Standard polyurethane bushings are an excellent suspension upgrade, as they tighten up squeaks and prevent spring damage.
Stock shackle bushings are not flanged and fit your stock suspension setup. Kit includes 6 bushings to serv
|
Our Price: $49.6
|
Scout II heavy-duty winter wiper blades are in stock and ready to ship. These blades work great with a small modification to the stock wiper arm to allow for the included screw and nylock nut to be used.
|
Our Price: $34.32 each
|
This is a factory-authorized reprint of the CTS-2304 service manual for all Scout II trucks built between 1972 and 1975 only. This is not anything like a Chilton's or a Haynes manual, but is a 600 page factory technical service manual with complete instructions and illustrations to guide you in you
|
Our Price: $129.01 each
|
White plastic door seal retainers. Used on all Scouts of all years.
|
Our Price: $0.9 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|
This is a new Gasket for your fuel sender to gas tank.
|
Our Price: $8.2 each
|
Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
Made in the USA
393953c92 1971-1978
|
Our Price: $184.02 each
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
This seal is made for the lower rear cab top. The original was poorly designed because it allowed the metal of the top to rub against the metal of the bulkhead in direct contact, destroying your paint. This is new and improved!
|
Our Price: $59.95 each
|
Sold in milled steel bare. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it\'s exact! We do not offer these chromed. You can have it chromed if you like, but we do not offer that service.
|
Our Price: $483.97 each
|
Kit includes one spring for each door lock mechanism.
|
Our Price: $25.3 IN STOCK NOW! EACH
|
Stainless steel bolt kit for your rear bumper. Holds your rear bumper on and will not rust and freeze up. A must for any restoration.
Made in the USA
|
Our Price: $10.58 each
|
2753948r1. Fits: 1966-1971 Scout 800, 800A, 800B
Die cast design like the original
Chrome plates and textured on the inside
Includes retaining clips
|
Our Price: $48.9
| |
