SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
This clip has myriad uses on old vehicles of all makes. It holds the emergency brake cables at the pedal and in various holding brackets on the frame and in the rear wheel backing plates. It holds the brake hoses in their support brackets on the frame. It holds some of the steel brake lines again
|
Our Price: $3.39 EACH
|
Rear bearing, tapered. Fits Scout 80 with Dana 27 axles. Race is not included.
|
Our Price: $252.05 each
|
1961-1967 Scout 80 and 800 could have Detroit or Cleveland type universal joints (as pictured). These U-joints have an internal lock ring instead of the external ring outside the cap. The cap diameter is about an inch and they are used on the Dana 27.
|
Our Price: $54.06 each
|
Scout 80/800 from 1961-1971 use this pad for the clutch and brake pedal.
Scout 800, Scout 80
|
Our Price: $32.02 each
|
Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|
This is brand new vented fuel cap to fit all International trucks.
This also fits other trucks too, as well as tractors and industrial engine fuel tanks.
|
Our Price: $21.26 each
|
_241785.jpg)
Replacement Wiper Blades for our Scout II Wiper Arm and Blade Replacement Kit. When you need replacement blades we have them.
|
Our Price: $12.79 each
|
Plastic heater valve replacement for all Scout 80 & 800, Scout II, Travelalls, and pickups with inline heater valve. While this is not a cadmium-plated steel unit like original, this plastic valve actually moves more easily, and will never rust away like the originals did. Install this and lubrica
|
Our Price: $56.73 each
|
Installation kit necessary for after market steering wheel use on a Scout II. Kit works with any of the three steering wheels that we carry.
Kit includes the adapter to the new steering wheel, the horn contacts, and plate, the mounting hardware, and detailed installation instructions.
|
Our Price: $102.87 each
|
We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend
|
Our Price: $29 each
|
|
Our Price: $6.43 each
|
This body mount kit is an extremely close reproduction of the original bushings used by International Harvester in the 1960s.
Every bump and curve has been reproduced in the smallest detail. These are not plastic washers repackaged to fool you into thinking that these are a body mount kit.
This
|
Our Price: $142.06 each
|
If you have aftermarket wheels they may be thicker than the originals. These studs are 1-15/16 inch long compared to stock 1-5/8 inch long. If you need longer studs these may work for you.
#wheelbolt
|
Our Price: $7.89 each
|
***Scout II top door seal special, proudly made in the USA*** Scout II door felt and squeegee for resealing the top of door opening of Scout II doors. These are the real deal, your windows won't rattle and will look original.
You will need 2 kits.
481437C1, 395872c1, 395873c1 - Inner 481437c1, 39
|
Our Price: $72.37 each
|
Gasket and seal kit for the Dana 20 transfer case used in most Scout II's. Easily identifiable, the Dana 20 had high and low speeds.
|
Our Price: $74.72 each
|
Scout II amber side marker lens. Great replacement part for your restoration.
International Harvester Scout, binder, overland
507599c1
|
Our Price: $42.95 each
|
This barrel clip fits a 1/8" stud and fits into a 11/64th hole, These are the little tiny guys that hold your emblems on in places were you do not have access to, like the back side of the sheet metal.
These were used on your tail gate of your scout to hold on the chrome "INTERNATIONAL".
, 28832
|
Our Price: $2.78 each
|
Warn hub gaskets 2 are needed per side. there was a smaller gasket but it is very rare.
|
Our Price: $10.95 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|
***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD***
This is the original International Harvester red color.
Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.
|
Our Price: $80.08 each
|
There are 14 screws and special washers here, which are enough screws to affix one Scout II door panel to the door.
|
Our Price: $22.34 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
These are new U-joints to fit the front axle shafts on Dana-44 open-knuckle front axles used in Scout II, Travelalls, and pickups, including 1000, 1100, 1200, 1010, 1110, 1210, 100, 150, and 200 4x4 chassis.
|
Our Price: $46.68 each
|
This is a factory-authorized reprint of the CTS-2302 service manual for all Scout 80 and 800 trucks. This is not anything like a Chilton's or a Haynes manual, but is a 400 page factory technical service manual with complete instructions and illustrations to guide you in your work. This does not h
|
Our Price: $84.89 - $124.81 each
|
This is a NEW Rubber bumper for your adjustable hood stop. You will be able to close your hood with out damaging your paint and it will also stop your hood from fluttering when you're driving over 30 miles per hour.
|
Our Price: $13.52 Each
| |
