SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
CURRENTLY BACKORDERED
215114R1***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manuf
|
Our Price: $53.13 BACKORDERED
|
New replacement Scout II side marker Light kit with satin black bezels
Fits: Scout II, Scout Terra/Traveler, D Series Pickup/Travelall
Includes:
4 die-cast metal marker bezels
2 amber lights and 2 red lights
Pre-installed foam gaskets
8 screws and 4 retainer clips
We also have these in the classi
|
Our Price: $149.95 Full Set
|
This travel top side window seal is a fantastic reproduction of the original. It fits great.
You'll notice that your original seal (or any you ever see on a travel top) has a seam in the center at the bottom of the window. This seal comes in a continuous loop but needs to be cut down slightly to 19
|
Our Price: $184.20 each
|
1961-1967 Scout 80 and 800 could have Detroit or Cleveland type universal joints (as pictured). These U-joints have an internal lock ring instead of the external ring outside the cap. The cap diameter is about an inch and they are used on the Dana 27.
|
Our Price: $54.06 each
|
Electric wiper motors are reliable, easy to install, and an excellent upgrade for any Scout 80 & 800. Kit includes hardware, harness, wiper arm, and blade for one side. Stainless housing.
Note : These fit really well for 1961-1965. Some modification to your dash will be required for the 66-71 Scou
|
Our Price: $158.10 IN STOCK NOW!
|
New Scout II red side marker lens
Replaces IH part
507600c1
|
Our Price: $42.95 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
New replacement Clutch Master Cylinder for Scout 80/800
|
Our Price: $79.95 Each
|
These are the plastic pivot bushings or bearings used on Scout 80 and 800, Scout II, and D-series pickups and Travelalls without hydraulic clutches. These fit inside the end of the bellcrank (also known as the clutch relay lever or cross shaft) around the each of the round balls on the frame and th
|
Our Price: $48.67 each
|
Dash bulbs for Scout II gauges.
|
Our Price: $2.13 each
|
This is brand new vented fuel cap to fit all International trucks.
This also fits other trucks too, as well as tractors and industrial engine fuel tanks.
|
Our Price: $21.26 each
|
These hose clamps are made of stainless steel, so they will never rust.
|
Our Price: $2.24 each
|
We have brand new wheel bearing hubs for all Scout II vehicles with either the Dana-44 or Dana-30 axle. These will fit vehicles with either disc or drum brakes. These will also fit 100 and 150 pickups and Travelalls built in 1974 and 1975.
|
Our Price: $190.36 each
|
Fits a spring that is 1 7/8" wide. These are 7/8" outside diameter. Standard polyurethane bushings are an excellent suspension upgrade, as they tighten up squeaks and prevent spring damage.
Stock shackle bushings are not flanged and fit your stock suspension setup. Kit includes 6 bushings to serv
|
Our Price: $59.95 Each
|
#21 in the above diagram is the part you are looking at
#24 is SP18769
#25 is SP10134
These are new side seals for use with the standard steel travel top used on Scout 80 & 800 trucks. These will work on the optional fastback sport top, but will not work on the optional half-cab top. These are mad
|
Our Price: $89.95 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $149.25 each
|
This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend
|
Our Price: $29.00 each
|
|
Our Price: $6.43 each
|
FITS ORIGINAL SCOUT II GAS CAP
This fuel filler tube is a reproduction of the original. It is new, made of steel, and fits both Scout II gas and diesel, 19 and 33 gallon tank.
Will fit standard (SP12935) gas cap as well as our aftermarket locking gas caps (SP13749)
|
Our Price: $296.24 each
|
These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|
All of the gas motors in all models of Scout and Scout II use these Champion brand spark plugs. We typically gap spark plugs to .035 when installing, which is very close to the Champion factory gap.
|
Our Price: $5.41 each
|
This fuel tank filler neck hose goes between the left side gas tank and the rear quarter panel on a Scout 80 or Scout 800. The flange seals to the outside of the body, and the assembly includes the vent hose as pictured.
We also have a Right side, passenger side available.
fuel tank filler neck l
|
Our Price: $133.45
|
Hold onto one of these walnut wood steering wheels whenever you drive your Scout!! Tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Genuine hardwood walnut finish with black finger grip and satin silver spokes. 4-spoke
13-1/2\" diameter, 2-1/4\"
|
Our Price: $267.45 each
|
This is a new electrolock ignition switch used on Scout 80 and 800, as well as R, S, A, B, C, D-series trucks. This might also fit L and M-series (Metro) trucks and also fit many larger trucks and busses including Schoolmaster, Loadstar, Paystar, et cetera.
This switch comes with a new chrome lo
|
Our Price: $54.95 each
|
This is the perfect screw to use on all IH valve covers. This will fix a lot of your leaks.
|
Our Price: $12.56 for 6 Bolts
|
Dash board light bulb
Lights up heater, head light and wiper indicators
|
Our Price: $2.13 each
| |
