SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
This is a NEW Rubber bumper for your adjustable hood stop. You will be able to close your hood with out damaging your paint and it will also stop your hood from fluttering when you're driving over 30 miles per hour.
|
Our Price: $13.52 Each
|
Electric wiper motors are reliable, easy to install, and an excellent upgrade for any Scout80 & 800. Kit includes hardware, harness, wiper arm, and blade for one side. Stainless housing.
Note : These fit really well for 1961-1965. Some modification to your dash will be required for the 66-71 Scout
|
Our Price: $158.1 IN STOCK NOW!
|
Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|
This fits all IH motors, including 152, 196, 266, 304, 345, and 392. Make those persistent oil leaks disappear!
Gaskets may come in cork or rubber, depending on availability.
Not sold in pairs
If you have a V8, order two
|
Our Price: $16.95 Each
|
There are 14 screws and special washers here, which are enough screws to affix one Scout II door panel to the door.
|
Our Price: $22.34 each
|
these are the real deal!! Dash board light bulb sockets. Lights up heater, head light and wiper indicators, gauges, speedo. fits all IH trucks and Scouts!!
|
Our Price: $5.1 each
|
These are new U-joints to fit the front axle shafts on Dana-44 open-knuckle front axles used in Scout II, Travelalls, and pickups, including 1000, 1100, 1200, 1010, 1110, 1210, 100, 150, and 200 4x4 chassis.
|
Our Price: $46.68 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|
We only have three. New Old Stock.
This is the best side view mirror to use for your Scout II. New old stock mirror made by IH in the 1970's. This is the replacement mirror that your IH dealer would have sold you in 1970's.
- Mounting holes may need to be re-drilled -
|
Our Price: $742.99 EACH
|
The later Scout II trucks used a plastic tail light housing. This is the replacement lamp socket for the upper socket which holds the tail and brake lamp (dual contact). Buy this socket if your old one is rusted and will not accept a tail lamp.
Made in the USA
 |
Our Price: $17.67 each
|
Rear bearing, tapered. Fits Scout 80 with Dana 27 axles. Race is not included.
|
Our Price: $252.05 each
|
Replacement bulbs for tail lights in Scout 80/800 and 1961-68 Travelall and Pickup. Kit includes 2 bulbs. 1157 1016 1034 1076 1077 1130 1154 1158 1493 2057 2357 2397 7528 17916 BAY15d S25 7225 3496 Automotive Brake Light Turn Light Mini Bulb Replacement for Scout's pickup & Travelall.
|
Our Price: $7.03 each
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
|
Our Price: $520.6 CALL FOR AVAILABILITY
|
New Scout II Glove Box. Cardboard just like OEM, Looks great in your truck!
|
Our Price: $64.75 each
|
Divorced choke control and used in accelerator linkage of Scout II, Metros, Travelalls, and Pickups. Parts books MT117, 124, 130, 131
|
Our Price: $6.92 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|
Finally available are original style transmission and transfer case mounts for your 3 speed Scout 80/800; keep your vehicle to spec while eliminating vibrations.
|
Our Price: $229.89 each
|
Scout II door plugs also used as Plug button that plugs up a hole. Were used in many applications, anything from covering up a un-used cigarette lighter to a body drain hole. We have these in many sizes. Just give us a call and we will get the size that you need.
|
Our Price: $4.72 each
|
Newly manufactured "All Wheel Drive" emblem for Scout 80/800.
|
Our Price: $75.62 each
|
Installation kit necessary for after market steering wheel use on a Scout II. Kit works with any of the three steering wheels that we carry.
Kit includes the adapter to the new steering wheel, the horn contacts, and plate, the mounting hardware, and detailed installation instructions.
|
Our Price: $102.87 each
|
1961-1967 Scout 80 and 800 could have Detroit or Cleveland type universal joints (as pictured). These U-joints have an internal lock ring instead of the external ring outside the cap. The cap diameter is about an inch and they are used on the Dana 27.
|
Our Price: $54.06 each
|
***International Harvester Scout 80/800 hood bumpers available again ***
This hood bumper is made by Scoutparts for the International Harvester Scout 80 & 800. This bumper is an accurate reproduction of the original hood bumper that was used by International.
Made in the USA
Our Price: $13.55 In stock now!
|
406683C1
This fuse panel Has been specifically designed to plug into your old original Scout II wiring without cutting & chopping on the original harness.
Remove the old glass tube panel and plug this into the old harness.
We can update any Scout harness that you order with a new updated blade ty
|
Our Price: $314.01 - $314.01 each
|
This is a new knob for the hood release cable on the dashboard. This is the later version which was made of plastic, but can be used to replace the earlier metal knob too. Often these are completely missing, either because they split, or because the cable got stuck and the knob came off. If your
|
Our Price: $29.95 each
|
This is a Scout II tail gate emblem that says "International". 8" X 1"
These have gotten very scarce for a long time, they are back in a brand new reproduction! 6 inches between pegs.
Tailgate
2754244R1
|
Our Price: $98.95 each
| |
