SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
We have no core fee but, You will need to send us your core before we ship. Clutch kit for Scout II, Travelall, or pickup with 11" clutch. Kit includes 11" pressure plate, clutch disc, throwout and pilot bearing, disc alignment tool and a 2 7/8th or 3 1/4 th inch grease sleeve. When Ordering This
|
Our Price: $695.95 each
|
Due to its size, this product must ship by truck freight.
Four point roll cages for Scout II! 1.75" x 14 gauge tubing.
High quality 4-point cage is made from hot rolled electric welded steel tubing, and is designed to give you extra headroom over other cages.
It is also the ideal platform for mo
|
Our Price: $635.22 each
|
This clip has myriad uses on old vehicles of all makes. It holds the emergency brake cables at the pedal and in various holding brackets on the frame and in the rear wheel backing plates. It holds the brake hoses in their support brackets on the frame. It holds some of the steel brake lines again
|
Our Price: $3.39 EACH
|
New window regulator crank handle for early Scouts.
This handle was used for the following applications :
1963-1971 Scout 80 / Scout 800
1961-1968 IH Pickup / Travelall
Loadstar / Also fits Graham sports cars.
|
Our Price: $33.12 each
|
Head light dimmer switch, floor mount. Fits Scout 80 and 800 plus all IHC models.
|
Our Price: $21.21 each
|
This is a complete set of 9 new LED lights to replace your old incandescent bulbs. You know, the ones that seem to only burn out when you are giving a ride to your mother in-law that does not quite like you...yet.
SPEEDO:
2 Illumination LEDs
2 Turn Signal
1 4x4 Engage
1 E-brake
1 Brights
ALT/FUEL:
|
Our Price: $33.26 set of 9 bulbs and inserts/sockets
|
New turn signal switch for your 1971-1976 IH Scout II.
(Looking for that hard-to-find 77-80 Turn Signal Swith? We've got it! See "related parts" below)
|
Our Price: $79.96 each
|
***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD***
This is the original International Harvester red color.
Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.
|
Our Price: $80.08 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|
Price is for one front and one rear. If you have tinkered with the roll up windows of your scout 80 & 800 and you just can't make them roll up and down smoothly, there's a good chance you need new front
|
Our Price: $74.85 each
|
We've put this kit together for your IH Scout II to seal up the rear of your rig!
Includes :
-- Lower tailgate seal (the weather-strip under the tailgate)
-- Side tailgate seals (two vertical seals on the two sides of your tailgate, if you take your top off)
-- Upper liftgate seal (the seal at t
|
Our Price: $102.79 each
|
This part will connect a custom steering wheel to your old Scout. You will retain your horn as well as your turn signal cancel. IT WORKS! You cant get this anywhere else!
This is for a 1961-1971 Scout 80 or 800.
If you need this part for a Scout II, use SP16464
|
Our Price: $72.09 each
|
These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|
Electric wiper motors are reliable, easy to install, and an excellent upgrade for any Scout 80 & 800. Kit includes hardware, harness, wiper arm, and blade for one side. Stainless housing.
Note : These fit really well for 1961-1965. Some modification to your dash will be required for the 66-71 Scou
|
Our Price: $158.10 IN STOCK NOW!
|
Includes wiring for indicator lights. Includes detailed directions. This harness is used to make wiring EASY for installing our Scout II gauge kit. product #sp13689. This harness is completely pre-wired and every wire is labeled. It is all ready to plug right into the original factory plastic gauge
|
Our Price: $236.10 each
|
Kit includes 2 high quality heavy duty shackles and hardware necessary to mount them on either the front or rear springs of any Scout 80 or Scout 800. Purchase 2 kits if you want to do both front and rear.
These shackles are an excellent way to get some extra tire clearance or accomodate lift spri
|
Our Price: $144.74 - $144.74 each
|
Transfer case decal for the Scout II.
396642C2
|
Our Price: $14.32 each
|
#25 in the above diagram is the part you are looking at
#24 is SP18769
#21 is SP10562
Door to body seal kit.
Applies to the body and the top of the Scout with glue (not included, ask). The door closes against the seal.
Includes upper and lower seals for both left and right doors.
Fits 1963-71 I
|
Our Price: $141.32 each
|
Shifter boot for Scout II Automatic transmission. This boot will also work for Scout 800 A & B Single shifter transfer case.
431600c1
|
Our Price: $64.16 Each
|
Such a cool and unique cap. The waxed cloth has a hardened "old leather" look and feel to it.
Brown washed wax cloth and nylon mesh back cap.
Velcro closure on back.
International Harvester hat
|
Our Price: $19.95 each
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $69.17 each
|
New Replacement Wiper Arms! An inexpensive way to replace your wiper arm. We've tried out many different after-market wiper arms, and these work great!
(works for both left and right)
Application :
1961-1971 IH Scout 80 / Scout 800
1961-198 IH Pickup / Travelall
|
Our Price: $57.49 each
|
This is a factory-authorized reprint of the CTS-2302 service manual for all Scout 80 and 800 trucks. This is not anything like a Chilton's or a Haynes manual, but is a 400 page factory technical service manual with complete instructions and illustrations to guide you in your work. This does not h
|
Our Price: $74.89 - $124.81 each
|
We had a really hard time finding these, so we decided to make them ourselves. Replace your old filter with this and stop your oil filter adapter from leaking. If you are updating your older filter with a newer spin-on adapter, you will need one of these.
|
Our Price: $32.53 each
|
This oil pan gasket fits the 4 and 8-cylinder motors used in International Harvester Scouts, trucks, Travelalls, and Metros.
IH oil gasket
151067R2
|
Our Price: $45.81 each
|
Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|
CURRENTLY BACKORDERED
215114R1***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manuf
|
Our Price: $53.13 BACKORDERED
| |
