SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
This is an NOS bolt for the connecting rods.
These are the bolts that attach your piston rods to the crankshaft.
|
Our Price: $29.2 each
|
Plastic heater valve replacement for all Scout 80 & 800, Scout II, Travelalls, and pickups with inline heater valve. While this is not a cadmium-plated steel unit like original, this plastic valve actually moves more easily, and will never rust away like the originals did. Install this and lubrica
|
Our Price: $56.73 each
|
#25 in the above diagram is the part you are looking at
#24 is SP18769
#21 is SP10562
Door to body seal kit.
Applies to the body and the top of the Scout with glue (not included, ask). The door closes against the seal.
Includes upper and lower seals for both left and right doors.
Fits 1963-71 I
|
Our Price: $141.32 each
|
All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6 cyclinder
|
Our Price: $508.10 - $508.10 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
These are new shifter decals for your Scout 80s and Scout 800s with 3-speed transmissions.
|
Our Price: $12.95 each
|
This clip replaces the original clip and spacer. It is made of a rigid plastic and will do the job as good as the original.
|
Our Price: $25.2 each
|
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp guage. NO MOVING PARTS!! This regulator has a capacity far beyond the original and will never burn out under these loads.
|
Our Price: $59.03 each
|
Fits a spring that is 1 7/8" wide. These are 7/8" outside diameter. Standard polyurethane bushings are an excellent suspension upgrade, as they tighten up squeaks and prevent spring damage.
Stock shackle bushings are not flanged and fit your stock suspension setup. Kit includes 6 bushings to serv
|
Our Price: $49.6
|
New Old stock comes with "IH" keys. The "IH" keys were made in the 1960's and have IH embossed into both keys.
This is a new electrolock ignition switch used on Scout 80 and 800, as well as R, S, A, B, C, D-series trucks. This might also fit L and M-series (Metro) trucks and also fit many large
|
Our Price: $53.35 each
|
1961-1967 Scout 80 and 800 could have Detroit or Cleveland type universal joints (as pictured). These U-joints have an internal lock ring instead of the external ring outside the cap. The cap diameter is about an inch and they are used on the Dana 27.
|
Our Price: $54.06 each
|
***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the customers with
|
Our Price: $53.13 each
|
This is a new knob for the hood release cable on the dashboard. This is the later version which was made of plastic, but can be used to replace the earlier metal knob too. Often these are completely missing, either because they split, or because the cable got stuck and the knob came off. If your
|
Our Price: $29.95 each
|
Automatic Shift Dial Plate
Park, Reverse, Neutral, Drive, Low Plate
Automatic gear indicator comes as pair - blank and lettered plates
Made in the USA
![](\"/images/usaflag-backed.gif\")
|
Our Price: $58.34 each
|
This easy install wiper blade works with the stock Scout II wiper arms. Some Scout II's have wiper arms that require a small bolt to hold the blade on. Look for two small holes at the end of your wiper arm.
Some Scout II's have a post on the wiper arm.
|
Our Price: $24.95 each
|
This 3 piece kit replaces all crucial parts holding the window. It fits all Scout 80 and 800's with rollup windows.
This kit includes the felt, squeegee, and the rear window guide.
Also, check out our Leading Edge Windo
|
Our Price: $64.95 Per Door
|
These are new plastic fan shrouds for Scout II. These are designed for use with V8 engines, and they will fit 4-cylinder motors too. These may or may not work with the inline engines (258, SD-33). If you have one of those engines, call us anyway to make sure.
|
Our Price: $202.77 each
|
Water Temp Sender For Scout 2 With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old water temp sender with this new updated sender for the most accura
|
Our Price: $41.87 each
|
This is a tail light lens gasket set for the round tail lights used on Scout 80 & 800 and on Travelalls and pickups. See SP10541 for a picture of the lens these mate with.
Each kit contains an inner and an outer gasket required to seal your lens against the weather. These prevent water, dust, an
|
Our Price: $12.95 each
|
If you have a 4 cylinder Scout 80, 800 there's a good chance you may need one of these. They tend to have gotten rusty and weak in the last 40 years.
|
Our Price: $23.87 each
|
Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
Made in the USA
393953c92 1971-1978
|
Our Price: $184.02 each
|
This fits all IH motors, including 152, 196, 266, 304, 345, and 392. Make those persistent oil leaks disappear!
Gaskets may come in cork or rubber, depending on availability.
Not sold in pairs
If you have a V8, order two
|
Our Price: $16.95 Each
|
|
Our Price: $14.17 each
|
This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.4 each
|
These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|
NEW "Scout" script emblem. Give that restoration project the finishing touch with emblems like these.
860265R1
|
Our Price: $82.42 each
|
Bet you didn't know you can replace that worn out ring gear on your flywheel! If your starter 'sings' to you every time you go to start your truck, you need to replace the ring gear. This is a much cheaper alternative to replacing the flywheel.
This is used on all flywheels used on the IH eng
|
Our Price: $106.59 each
| |
