SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
New bolt set for your Scout II travel top. The travel top is the standard top used on 100" wheel base Scout II vehicles. These bolts hold the top down to the body.
|
Our Price: $24.16 each
|
This travel top side window seal is a fantastic reproduction of the original. It fits great.
You'll notice that your original seal (or any you ever see on a travel top) has a seam in the center at the bottom of the window. This seal comes in a continuous loop but needs to be cut down slightly to 19
|
Our Price: $184.2 each
|
Brand-New IH Scout II Accelerator / Throttle Cable Part. This cable is 28-5/8" end to end.
This is the REAL DEAL IH Part. part 440983C1
73-75 6-232/258 engines
To fit the 1973-1978 Scout II with 304 / 345 V8.
This cable has a socket fitting on the carburetor end, and a ball on the gas pedal en
|
Our Price: $104.5 each
|
New lined-cardboard Scout 800 Glove Box. Looks great in your truck!
|
Our Price: $43.12 each
|
***seat belts currently made to order, lead time involved***
These 3 point seat belts have an adjustable buckle lead. They are much safer than the original 2 point seat belts.
They are NOT the type that the factory installed.
To use these seat belts you will have to fabricate a 3rd anchor point.
|
Our Price: $141.27 each
|
All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6 cyclinder
|
Our Price: $508.10 - $508.10 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|
Plastic heater valve replacement for all Scout 80 & 800, Scout II, Travelalls, and pickups with inline heater valve. While this is not a cadmium-plated steel unit like original, this plastic valve actually moves more easily, and will never rust away like the originals did. Install this and lubrica
|
Our Price: $56.73 each
|
***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the customers with
|
Our Price: $53.13 each
|
Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|
This body mount kit is an extremely close reproduction of the original bushings used by International Harvester in the 1960s.
Every bump and curve has been reproduced in the smallest detail. These are not plastic washers repackaged to fool you into thinking that these are a body mount kit.
This
|
Our Price: $142.06 each
|
We've put this kit together for your IH Scout II to seal up the rear of your rig!
Includes :
-- Lower tailgate seal (the weather-strip under the tailgate)
-- Side tailgate seals (two vertical seals on the two sides of your tailgate, if you take your top off)
-- Upper liftgate seal (the seal at t
|
Our Price: $102.79 each
|
NEW "Scout" script emblem. Give that restoration project the finishing touch with emblems like these.
|
Our Price: $75.62 each
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
These are replacement wheel studs for the front wheels only on Scout IIs with disc brakes. Please specify whether you want right or left-hand threads. Sold each.
|
Our Price: $5.74 each
|
395944C1, This little clip was used on just about all IH rigs. This little clip holds on many of your door seals. The earlier ones were metal and have now rusted away.
|
Our Price: $0.9 each
|
This fits all IH motors, including 152, 196, 266, 304, 345, and 392. Make those persistent oil leaks disappear!
Gaskets may come in cork or rubber, depending on availability.
Not sold in pairs
If you have a V8, order two
|
Our Price: $16.95 Each
|
Windshield top to frame seal, also known as the upper windshield seal, this has a 7 bolt pattern. It works for 1965-71 Scouts.
|
Our Price: $41.95
|
This 3 piece kit replaces all crucial parts holding the window. It fits all Scout 80 and 800's with rollup windows.
This kit includes the felt, squeegee, and the rear window guide.
Also, check out our Leading Edge Windo
|
Our Price: $64.95 Per Door
|
Pin; straight interior handle for window and door.
Holds interior handles on the inside of door.
|
Our Price: $10.17 per pin
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
If you have aftermarket wheels they may be thicker than the originals. These studs are 1-15/16 inch long compared to stock 1-5/8 inch long. If you need longer studs these may work for you.
#wheelbolt
|
Our Price: $7.89 each
|
Foam gasket between the steel tail light housing and the body on early scout II's and D line pickups
|
Our Price: $9.08 each
|
The Scout II shift cable controls the gear shifting for Scout II vehicles equipped with automatic transmissions. Replace your worn or broken shift cable to get that Scout back on the road. 36\"
|
Our Price: $121.66 each
|
Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
Made in the USA
393953c92 1971-1978
|
Our Price: $184.02 each
| |
