SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
The Super Scout or SS II used this front grill. These high-quality replacements can be used on 1976-1979 Scout II and are a great upgrade. You will need to modify your stock front sheet metal to accept this piece. Made in the USA
481685C1 SSII or Scout II grille
|
Our Price: $282.28 EACH
|
This seal is made for the lower rear cab top. The original was poorly designed because it allowed the metal of the top to rub against the metal of the bulkhead in direct contact, destroying your paint. This is new and improved!
|
Our Price: $59.95 each
|
If you have a 4 cylinder Scout 80, 800 there's a good chance you may need one of these. They tend to have gotten rusty and weak in the last 40 years.
|
Our Price: $23.87 each
|
After market non-oem Stainless Steel head light bezel rings. Excellent restoration piece. 9.25" OD 7.25" ID.
APPLICATION DETAILS:
1961-71 Scout-very close to original look
1941-49 K/KB- Fit all models with close to original look
|
Our Price: $39.95 EACH
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
We now have brand new shifter knobs to fit Scout 80, Scout 800, and pickups and Travelalls. This was used on 3 and some 4-speed transmissions used in C, K, KB, M, L, R, S, A, B, and C-series trucks.
Made of phenolic rubber like the original, This has a 3/8" SAE (fine) thread. If this is not c
|
Our Price: $31.53 each
|
This is a plastic Sheet metal Screw nut used in scout II doors and many other IH Trucks and Travelalls.
fits a size 8 Screw and a 9MM (3/8)Square hole
|
Our Price: $0.53 each
|
This 3 piece kit replaces all crucial parts holding the window. It fits all Scout 80 and 800's with rollup windows.
This kit includes the felt, squeegee, and the rear window guide.
Also, check out our Leading Edge Windo
|
Our Price: $64.95 Per Door
|
Transfer case decal for the Scout II.
396642C2
|
Our Price: $14.32 each
|
Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|
Brand new interior door handle for Scout 80 and Scout 800.
Exact reproduction of the original handle. Can also be drilled and used as a replacement for bolt on style handles used on some Scouts.
|
Our Price: $12.84
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
This is a factory-authorized reprint of the CTS-2302 service manual for all Scout 80 and 800 trucks. This is not anything like a Chilton's or a Haynes manual, but is a 400 page factory technical service manual with complete instructions and illustrations to guide you in your work. This does not h
|
Our Price: $84.89 - $124.81 each
|
Automatic Shift Dial Plate
Park, Reverse, Neutral, Drive, Low Plate
Automatic gear indicator comes as pair - blank and lettered plates
Made in the USA
![](\"/images/usaflag-backed.gif\")
|
Our Price: $58.34 each
|
Fits a spring that is 1 7/8" wide. These are 7/8" outside diameter. Standard polyurethane bushings are an excellent suspension upgrade, as they tighten up squeaks and prevent spring damage.
Stock shackle bushings are not flanged and fit your stock suspension setup. Kit includes 6 bushings to serv
|
Our Price: $49.6
|
We have brand new wheel bearing hubs for all Scout II vehicles with either the Dana-44 or Dana-30 axle. These will fit vehicles with either disc or drum brakes. These will also fit 100 and 150 pickups and Travelalls built in 1974 and 1975.
|
Our Price: $190.36 each
|
Every scout 80/800 needs 4 of these. The hole size is 1 3/8", which may not be stock depending on your year.
|
Our Price: $59.03 working on new batch
|
New Scout II Glove Box. Cardboard just like OEM, Looks great in your truck!
|
Our Price: $64.75 each
|
Price is for one front and one rear. If you have tinkered with the roll up windows of your scout 80 & 800 and you just can't make them roll up and down smoothly, there's a good chance you need new front
|
Our Price: $74.85 each
|
These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
This is a brand new shift knob decal for all Scout II, pickup, and Travelall that had 4-speed transmissions. Please specify whether you have Reverse in the up or down position. These are made of the same aluminum foil with black painted overlay, and have adhesive backing to attach to the knob. Th
|
Our Price: $11.95 each
|
Windshield top to frame seal, also known as the upper windshield seal, this has a 7 bolt pattern. It works for 1965-71 Scouts.
|
Our Price: $41.95
|
Hold onto one of these walnut wood steering wheels whenever you drive your Scout!! Tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Genuine hardwood walnut finish with black finger grip and satin silver spokes. 4-spoke
13-1/2\" diameter, 2-1/4\"
|
Our Price: $267.45 each
|
This clip has myriad uses on old vehicles of all makes. It holds the emergency brake cables at the pedal and in various holding brackets on the frame and in the rear wheel backing plates. It holds the brake hoses in their support brackets on the frame. It holds some of the steel brake lines again
|
Our Price: $3.39 EACH
|
Foam gasket between the steel tail light housing and the body on early scout II's and D line pickups
|
Our Price: $9.08 each
|
Dash bulbs for Scout II gauges.
|
Our Price: $2.13 each
| |
