SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

We have no core fee but, You will need to send us your core before we ship. Clutch kit for Scout II, Travelall, or pickup with 11" clutch. Kit includes 11" pressure plate, clutch disc, throwout and pilot bearing, disc alignment tool and a 2 7/8th or 3 1/4 th inch grease sleeve. When Ordering This
|
Our Price: $684.74 each
|

Transfer case decal for the Scout II.
396642C2
|
Our Price: $14.32 each
|

So close to original that it\'s difficult to tell the difference. Many states do not require a front plate. Because of this, we have deleted the holes for the license plate.
Same original thickness and original mounting holes. Super close reproduction of factory original.
In stock now.
Fits bot
|
Our Price: $483.97 each
|

In stock now! 435317c1
|
Our Price: $9.95 ECH
|

Super comfy, one size fits most, red and black plaid IH beanie cap, warm hat.
|
Our Price: $13.48 CALL FOR AVAILABILITY
|

Scout 80 new replacement exterior door handles. These handles come with keys. These are an excellent non-oem replacement to add to any quality restoration.
These handles may also be used on Metros
|
Our Price: $68.82
|

Rear extended brake lines for Scout II with drum brakes are 5" longer than stock to accomodate 4" lift kits. Our lines are braided stainless, and sheathed to ensure years of duty.
Vehicle uses one hose in the center of the rear axle. This is only one hose you're buying.
|
Our Price: $89.95 each
|

This is brand new vented fuel cap to fit all International trucks.
This also fits other trucks too, as well as tractors and industrial engine fuel tanks.
|
Our Price: $21.26 each
|

This is the perfect screw to use on all IH valve covers. This will fix a lot of your leaks.
|
Our Price: $12.56 for 6 Bolts
|

The Super Scout or SS II used this front grill. These high-quality replacements can be used on 1976-1979 Scout II and are a great upgrade. You will need to modify your stock front sheet metal to accept this piece. Made in the USA
481685C1 SSII or Scout II grille
|
Our Price: $282.28 EACH
|

New lined-cardboard Scout 800 Glove Box. Looks great in your truck!
|
Our Price: $43.12 each
|

Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|

Restoration quality bumper stand-off brackets. Attention to detail makes a good restoration great! ****Priced per offset****.
Made in the USA
|
Our Price: $111.47 EACH
|

This fuel tank filler neck hose goes between the left side gas tank and the rear quarter panel on a Scout 80 or Scout 800. The flange seals to the outside of the body, and the assembly includes the vent hose as pictured.
We also have a Right side, passenger side available.
fuel tank filler neck l
|
Our Price: $133.45
|

We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|

Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|

We have these little clips that are used inside your Scout II doors.
Includes one left and one right
|
Our Price: $8.88 each
|

Scout II ignition lock cylinder with key. This is a brand-new item.
Now comes with two unbranded keys that do not have the international logo
|
Our Price: $39.95 each
|

***seat belts currently made to order, lead time involved***
These 3 point seat belts have an adjustable buckle lead. They are much safer than the original 2 point seat belts.
They are NOT the type that the factory installed.
To use these seat belts you will have to fabricate a 3rd anchor point.
|
Our Price: $141.27 each
|

Tail light wiring harness (pigtail) for rear tail/brake bulb sockets.
|
Our Price: $32.95 each
|

Brand new taillight lens for 1961-71 Scout 80 and 800, 1961-1969 IH Pickup and Travelall. Just like the original minus the IH logo in the center.
Sold Each
replaces 210610R91
Gaskets can be found on SP10539
|
Our Price: $21.95 Each
|

Includes wiring for indicator lights. Includes detailed directions. This harness is used to make wiring EASY for installing our Scout II gauge kit. product #sp13689. This harness is completely pre-wired and every wire is labeled. It is all ready to plug right into the original factory plastic gauge
|
Our Price: $226.1 each
|

Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|

All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|

This is a rebuild kit to fit the Holley Model 1904 as used by Scouts, Travelalls, and pickups. This includes the 152 and 196 4-cylinder motors and engines.
This same carb was used in IH trucks with the 220/240 Black Diamond and the 220/240 Silver Diamond engines.
|
Our Price: $143.76 each
|

Priced each. These brand new junior west coast style mirrors are great for Scouts, pickups, campers, and tow vehicles. The 10" X 5" mirror head is chrome with silvered glass, the tubing is heavy duty chrome finish with compression nuts. These have curved edges (more of a rounded rectangle) and are d
|
Our Price: $78.53 each
|

The later Scout II trucks with the plastic tail light housings use this replaceable lamp socket. This is the lower of the two sockets, accepts a single contact reverse bulb, and is a direct replacement for you worn or rusted socket.
|
Our Price: $17.67 each
|
|