SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Water Temp Sender For Scout 2 With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old water temp sender with this new updated sender for the most accura
|
Our Price: $41.87 each
|
These are new U-joints to fit the front axle shafts on Dana-44 open-knuckle front axles used in Scout II, Travelalls, and pickups, including 1000, 1100, 1200, 1010, 1110, 1210, 100, 150, and 200 4x4 chassis.
|
Our Price: $46.68 each
|
New turn signal switch for your 1971-1976 IH Scout II.
(Looking for that hard-to-find 77-80 Turn Signal Swith? We've got it! See "related parts" below)
|
Our Price: $79.96 each
|
NEW "Scout" script emblem. Give that restoration project the finishing touch with emblems like these.
860265R1
|
Our Price: $82.42 each
|
162210R1 - Clip to hold window regulator arms to window for all Scouts 1963-80 and all the others from that period. These also fit full-size Jeep Wagoneers, Grand Wagoneers, and Cherokee door and tailgate windows.
|
Our Price: $18.19 each
|
This body mount kit is an extremely close reproduction of the original bushings used by International Harvester in the 1960s.
Every bump and curve has been reproduced in the smallest detail. These are not plastic washers repackaged to fool you into thinking that these are a body mount kit.
This
|
Our Price: $149.95
|
NOS Original Scout II automatic shift boot seal.
Please see our listing for a very nice reproduction SP12666
|
Our Price: $74.72 each
|
Brand-New IH Scout II Accelerator / Throttle Cable Part. This cable is 28-5/8" end to end.
This is the REAL DEAL IH Part. part 440983C1
73-75 6-232/258 engines
To fit the 1973-1978 Scout II with 304 / 345 V8.
This cable has a socket fitting on the carburetor end, and a ball on the gas pedal en
|
Our Price: $99.5 each
|
This travel top side window seal is a fantastic reproduction of the original. It fits great.
You'll notice that your original seal (or any you ever see on a travel top) has a seam in the center at the bottom of the window. This seal comes in a continuous loop but needs to be cut down slightly to 19
|
Our Price: $184.2 each
|
Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|
We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|
These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|
Warn hub gaskets 2 are needed per side. there was a smaller gasket but it is very rare.
|
Our Price: $10.95 each
|
Every scout 80/800 needs 4 of these. The hole size is 1 3/8", which may not be stock depending on your year.
Front and rear shackle mount Scout 80/800
|
Our Price: $64.42
|
This is the perfect screw to use on all IH valve covers. This will fix a lot of your leaks.
|
Our Price: $12.56 for 6 Bolts
|
These are new large "Scout II" decals.
|
Our Price: $30.95 each
|
We have brand new wheel bearing hubs for all Scout II vehicles with either the Dana-44 or Dana-30 axle. These will fit vehicles with either disc or drum brakes. These will also fit 100 and 150 pickups and Travelalls built in 1974 and 1975.
|
Our Price: $190.36 each
|
Brand new interior door handle for Scout 80 and Scout 800.
Exact reproduction of the original handle. Can also be drilled and used as a replacement for bolt on style handles used on some Scouts.
|
Our Price: $12.84
|
Kit includes 2 high quality heavy duty shackles and hardware necessary to mount them on either the front or rear springs of any Scout 80 or Scout 800. Purchase 2 kits if you want to do both front and rear.
These shackles are an excellent way to get some extra tire clearance or accomodate lift spri
|
Our Price: $144.74 - $144.74 each
|
***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD***
This is the original International Harvester red color.
Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.
|
Our Price: $80.08 each
|
Tail light wiring harness (pigtail) for rear tail/brake bulb sockets.
|
Our Price: $34.95 each
|
Gasket and seal kit for the Dana 20 transfer case used in most Scout II's. Easily identifiable, the Dana 20 had high and low speeds.
|
Our Price: $74.72 each
|
This is brand new vented fuel cap to fit all International trucks.
This also fits other trucks too, as well as tractors and industrial engine fuel tanks.
|
Our Price: $21.26 each
|
New aftermarket round side view mirror. Same primitive design as the original, this mounts directly to the upper door hinges (there should be a threaded hole in the front surface of each hinge)..
-MIRROR HEAD ONLY-
|
Our Price: $133.45 EACH
|
Finally available are original style transmission and transfer case mounts for your 3 speed Scout 80/800; keep your vehicle to spec while eliminating vibrations.
|
Our Price: $229.89 each
|
2753948r1. Fits: 1966-1971 Scout 800, 800A, 800B
Die cast design like the original
Chrome plates and textured on the inside
Includes retaining clips
|
Our Price: $48.9
|
215114R1***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the custome
|
Our Price: $53.13 each
| |
