SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Hold onto one of these walnut wood steering wheels whenever you drive your Scout!! Tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Genuine hardwood walnut finish with black finger grip and satin silver spokes. 4-spoke
13-1/2\" diameter, 2-1/4\"
|
Our Price: $267.45 each
|
We need to know if you have a 60s or 70s scout. Includes 2 bolts,4 washers,2 nuts. Each scout requires 4 bolts for the front seat and 3 bolts for the back seat.
|
Our Price: $5.83 each
|
All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6 cyclinder
|
Our Price: $508.10 - $508.10 each
|
This is a Scout II tail gate emblem that says "International". 8" X 1"
These have gotten very scarce for a long time, they are back in a brand new reproduction! 6 inches between pegs.
Tailgate
2754244R1
|
Our Price: $98.95 each
|
Kit includes one spring for each door lock mechanism.
|
Our Price: $25.3 IN STOCK NOW! EACH
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
This is a factory-authorized reprint of the CTS-2304 service manual for all Scout II trucks built between 1972 and 1975 only. This is not anything like a Chilton's or a Haynes manual, but is a 600 page factory technical service manual with complete instructions and illustrations to guide you in you
|
Our Price: $124.01 each
|
Replaces IH # 367570C1
Fits: 1969-1970 Scout 800, 1971-80 Scout II, 1969-1975 Pickup and Travelall, 1976-80 Traveler
|
Our Price: $22.95 Each
|
This fuel tank filler neck hose goes between the left side gas tank and the rear quarter panel on a Scout 80 or Scout 800. The flange seals to the outside of the body, and the assembly includes the vent hose as pictured.
We also have a Right side, passenger side available.
fuel tank filler neck l
|
Our Price: $133.45
|
This kit includes the two hoses that connect the defroster vents in your truck.
|
Our Price: $39.95 each
|
This is a new Gasket for your fuel sender to gas tank.
|
Our Price: $7.2 each
|
393250C2 - Most Scout II's with either 4 speed manual or automatic transmission use this transmission mount assembly. One side of the mount attaches to the transmission housing and the other side mounts to the cross member. This should also fit stock 1971-1974s with 3spd or 4spd manuals.
|
Our Price: $71.56 each
|
New Old stock comes with "IH" keys. The "IH" keys were made in the 1960's and have IH embossed into both keys.
This is a new electrolock ignition switch used on Scout 80 and 800, as well as R, S, A, B, C, D-series trucks. This might also fit L and M-series (Metro) trucks and also fit many large
|
Our Price: $53.35 each
|
We have brand new transfer case shifter knobs for your Scout 80 or 800. These are identical to the original units. It is amazing how much difference little items like these make in your truck restoration. Sold in pairs.
|
Our Price: $19.73 - $126.32 pair
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $75.21 each
|
These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|
We have these little clips that are used inside your Scout II doors.
Includes one left and one right
|
Our Price: $8.88 each
|
Scout 80/800 from 1961-1971 use this pad for the clutch and brake pedal.
Scout 800, Scout 80
|
Our Price: $32.02 each
|
Pin; straight interior handle for window and door.
Holds interior handles on the inside of door.
|
Our Price: $10.17 per pin
|
Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|
This aftermarket tie rod assembly replaces both the short and long tie rod ends in any Scout 80 or Scout 800 (for 1961-1971 Scouts) To use the high performace tie rod assembly in place of your old tie rod assembly you must change your drag link to a tie-rod style drag link (SP17221).
|
Our Price: $419.91 each
|
Rear extended brake lines for Scout II with drum brakes are 5" longer than stock to accomodate 4" lift kits. Our lines are braided stainless, and sheathed to ensure years of duty.
Vehicle uses one hose in the center of the rear axle. This is only one hose you're buying.
|
Our Price: $97.58 each
|
Super good, super strong, super resistant to gas, oil and diesel. Use gloves when applying. So good that it is hard to get off your hands.
This item has to ship ground because it's ORM-D, which makes the freight high to remote locations.
|
Our Price: $15.61 each
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|
Scout 80/800 chrome air cleaner for 4 And 6 cylinder motors. Will also work on Scout II with 6 cylinder engines. Replaces the oil bath air cleaner with a paper air filter. Improves intake air flow, which allows motor to breathe easier. 6.5 inch diameter.
|
Our Price: $125.76 each
|
For #8 Screw.
|
Our Price: $1.44 each
|
Stainless steel bolt kit for your rear bumper. Holds your rear bumper on and will not rust and freeze up. A must for any restoration.
Made in the USA
|
Our Price: $10.58 each
| |
