SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
If your windows are not rolling up and down smoothly, this could be your answer. This new plastic strip holds and helps your window roll up and down smoothly. Reduces rattles in your doors.
Brand new window guide for Scout II, Traveler, and Terra 1971 to 1980. Comes with fastener kit, which include
|
Our Price: $81.92 Priced per pair
|
This is a brand-new, side marker light assembly to fit all Scout II trucks, as well as 1971 to 1975 D-series pickups and Travelalls. This comes complete with new chromed bezel, lens, gasket, mounting gasket, and screws. Nothing makes as big a difference as new lights!
Available in red and amber,
|
Our Price: $69.93 - $69.93
|
Brand new wiper switch for Scout II. Two speed switch, push to wash, internal circuit breaker.
|
Our Price: $89.98 each
|
This mount is designed to replace the factory mount. It uses polyurethane and nylon bushings.
**This mount is intended for a Scout II with a 4 speed and T-19 transmission.
Made in the USA
|
Our Price: $49.9 each
|
Rear axle outer oil seal scout 80 Dana 27.
|
Our Price: $29.38 each
|
This is a plastic Sheet metal screw nut used in IH head lights, like head light bezels. Also can hold your head light bezel on to your grille.
Fits a #6 Screw and a 5/16" square hole
|
Our Price: $1.48 each
|
This is a new water pump and gasket. This pump will fit all 4-cylinder and IH V8 engines (152, 196, 266, 304, 345, 392). The hub is drilled with 8 holes; four of those holes are for the standard bolt-on fan, and the other holes allow attachment of the optional bolt-on fan clutch. No matter which
|
Our Price: $148.35 each
|
The Super Scout or SS II used this front grill. These high-quality replacements can be used on 1976-1979 Scout II and are a great upgrade. You will need to modify your stock front sheet metal to accept this piece. Made in the USA
481685C1 SSII or Scout II grille
|
Our Price: $282.28 EACH
|
Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|
We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
New lined-cardboard Scout 800 Glove Box. Looks great in your truck!
|
Our Price: $43.12 each
|
Gasket and seal kit for the Dana 20 transfer case used in most Scout II's. Easily identifiable, the Dana 20 had high and low speeds.
|
Our Price: $74.72 each
|
Emblem is for fender badges on all Scout IIs as well as the 1961 to 75 trucks & Travelalls. Dress up that truck with little detail items like this badge.
These are made of base metal and chrome-plated and enamel-painted. These are held on with metal posts on the back side.
|
Our Price: $78.95 each
|
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp guage. NO MOVING PARTS!! This regulator has a capacity far beyond the original and will never burn out under these loads.
|
Our Price: $59.03 each
|
Kit includes one spring for each door lock mechanism.
|
Our Price: $25.3 IN STOCK NOW! EACH
|
Holds your fuel tank in place. They are sold in pairs. The straps are 36" by 2" and come galvanized.
|
Our Price: $61.67 each
|
Original type temperature sending units screw into the intake manifold near the water jacket, and accept the stock female spade connector. Pipe thread measures 1/2" using ruler.
|
Our Price: $52.63 each
|
Scout 80/800 door check straps made as exact replicas of the factory part. Available in black, and look great on any door. Sold Each.
|
Our Price: $20.59 each
|
This fuel tank filler neck hose goes between the left side gas tank and the rear quarter panel on a Scout 80 or Scout 800. The flange seals to the outside of the body, and the assembly includes the vent hose as pictured.
We also have a Right side, passenger side available.
fuel tank filler neck l
|
Our Price: $133.45
|
We have brand new transfer case shifter knobs for your Scout 80 or 800. These are identical to the original units. It is amazing how much difference little items like these make in your truck restoration. Sold in pairs.
|
Our Price: $19.73 - $126.32 pair
|
2 small and 2 large gaskets for both turn signal lens and bezels
Fits: 1950-55 L & R Series Pickup, 1950-55 Travelall
gaskets only, no lens
|
Our Price: $21.95
|
Kit includes 2 high quality heavy duty shackles and hardware necessary to mount them on either the front or rear springs of any Scout 80 or Scout 800. Purchase 2 kits if you want to do both front and rear.
These shackles are an excellent way to get some extra tire clearance or accomodate lift spri
|
Our Price: $144.74 - $144.74 each
|
Stainless steel bolt kit for your rear bumper. Holds your rear bumper on and will not rust and freeze up. A must for any restoration.
Made in the USA
|
Our Price: $10.58 each
|
This clip replaces the original clip and spacer. It is made of a rigid plastic and will do the job as good as the original.
|
Our Price: $25.2 each
|
***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the customers with
|
Our Price: $53.13 each
|
Pin; straight interior handle for window and door.
Holds interior handles on the inside of door.
|
Our Price: $10.17 per pin
| |
