SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|

Gasket that goes on the top of your Scout 80, Scout 800 gas tank. Need one per gas tank. This gasket is only used on original metal fuel tanks.
|
Our Price: $11.42 each
|

These are brand new. They are EXACTLY OEM and will fit Scout 80, Scout 800, and Sport Scout. Please note that due to the use of natural rubber in these cylinders, it is necessary to use a special hydraulic fluid. We recommend using the Lucas fluid (SP10162), which has lubricants added to prolong
|
Our Price: $166.3 each
|

Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|

Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|

If you have an A, B, or C-series Travelall or pickup, and cannot find blades for it, or yours have gotten so bad over the years that you cannot use it anymore, we have the correct replacement blades for you. These are new rubber blades and the bracket or holder that attaches it to the arm. The bla
|
Our Price: $42.81 each
|

This easy install wiper blade works with the stock Scout II wiper arms. Some Scout II's have wiper arms that require a small bolt to hold the blade on. Look for two small holes at the end of your wiper arm.
Some Scout II's have a post on the wiper arm.
|
Our Price: $24.95 each
|

***LIMITED QUANTITIES***SOLD EACH ******Very hard to find! New old stock trim moulding clips for Scout II.
YES, THERE ARE FOUR IN THE PHOTO. ALLOWING YOU TO SEE DIFFERENT ANGLES. YOU WILL ONLY RECEIVE ONE AT THIS PRICE. PRICED EACH.
|
Our Price: $38.93 EACH
|

We have no core fee but, You will need to send us your core before we ship. Clutch kit for Scout II, Travelall, or pickup with 11" clutch. Kit includes 11" pressure plate, clutch disc, throwout and pilot bearing, disc alignment tool and a 2 7/8th or 3 1/4 th inch grease sleeve. When Ordering This
|
Our Price: $684.74 each
|

Radiator overflow bottle, in combination this a pressure cap, can keep your cooling system healthy for years to come.
Works great for your IH!
|
Our Price: $29.89 each
|

We had a really hard time finding these, so we decided to make them ourselves. Replace your old filter with this and stop your oil filter adapter from leaking. If you are updating your older filter with a newer spin-on adapter, you will need one of these.
|
Our Price: $32.53 each
|

Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|

This kit includes the two hoses that connect the defroster vents in your truck.
|
Our Price: $39.95 each
|

Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|

Each kit of polyurethane bushings will service one axle and tighten up your ride quality while eliminating squeaks.
The overall length of these bushings is 2.25 inches, 1.25 outside diameter. this works with stock shackles or our aftermarket shackles.
|
Our Price: $97.98 each
|

This is a plastic Sheet metal Screw nut used in scout II doors and many other IH Trucks and Travelalls.
fits a size 8 Screw and a 9MM (3/8)Square hole
|
Our Price: $0.53 each
|

393250C2 - Most Scout II's with either 4 speed manual or automatic transmission use this transmission mount assembly. One side of the mount attaches to the transmission housing and the other side mounts to the cross member. This should also fit stock 1971-1974s with 3spd or 4spd manuals.
|
Our Price: $71.56 each
|

Price is for one front and one rear. If you have tinkered with the roll up windows of your scout 80 & 800 and you just can't make them roll up and down smoothly, there's a good chance you need new front
|
Our Price: $74.85 each
|

This is a brand-new sill scuff plate for the side door thresholds on your Scout II. This is the metal plate that holds the weatherstrip down on the flange and protects it against tearing due to scuffing when you climb in and out of the vehicle.
These are brand new extruded aluminum with standard
|
Our Price: $62.74 each
|

Replaces IH # 367570C1
Fits: 1969-1970 Scout 800, 1971-80 Scout II, 1969-1975 Pickup and Travelall, 1976-80 Traveler
|
Our Price: $22.95 Each
|

This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.4 each
|

This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
|
Our Price: $520.6 CALL FOR AVAILABILITY
|

Replaces IH # 367568C1
Fits: 1969-70 Scout 800, 1971-80 Scout II, 1969-75 Pickup & Travelall, 1976-80 Traveler/Terra
soft cork material
|
Our Price: $7.95 Each
|

There are 14 screws and special washers here, which are enough screws to affix one Scout II door panel to the door.
|
Our Price: $22.34 each
|

Overall width 2" inches. 7/8" outside daimeter. Brand new spring bushings for your Scout 80 or Scout 800. One kit will service one axle and tighten up your ride quality while eliminating squeaks.
Flanged bushings are for 2 inch aftermarket shackles on an 80/800.
|
Our Price: $70.85 each
|

Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|

This is an NOS bolt for the connecting rods.
These are the bolts that attach your piston rods to the crankshaft.
|
Our Price: $29.2 each
|
|