SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Priced each. These are very nice reproductions of the forward body mounts (located near the front of of the front floorpan) used on Scout II. Goes under your feet as you drive down the road. The originals have typically rusted away or fatigued to the point they break or bend. Now you can get your
|
Our Price: $92.67 each
|
Replacement bulbs for tail lights in Scout 80/800 and 1961-68 Travelall and Pickup. Kit includes 2 bulbs. 1157 1016 1034 1076 1077 1130 1154 1158 1493 2057 2357 2397 7528 17916 BAY15d S25 7225 3496 Automotive Brake Light Turn Light Mini Bulb Replacement for Scout's pickup & Travelall.
|
Our Price: $7.03 each
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
Tail light wiring harness (pigtail) for rear tail/brake bulb sockets.
|
Our Price: $32.95 each
|
No need to cut any wires; connector adapter included in the kit. This courtesty door switch works great on Scout II's, Travelall's and pickups.
This kit includes: adapter pig tail, self-tapping screw, and water proof switch.
****not going to work well for a 60s scout****
|
Our Price: $22.9 each
|
This is a brand-new sill scuff plate for the side door thresholds on your Scout II. This is the metal plate that holds the weatherstrip down on the flange and protects it against tearing due to scuffing when you climb in and out of the vehicle.
These are brand new extruded aluminum with standard
|
Our Price: $78.74 each
|
These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|
If you are trying to make your old Window regulator work and or if you have another from another year of scout and you want to reattatch your fan gear, this is the exact rivit that you need to rehab your Window regulator. Used on all IH's from 1940 to 1971
|
Our Price: $15.69 each
|
Hub and rotor for Scout II with front disc brakes (2WD & 4WD) and for 1974-75 4x4 pickups and Travelalls.
These come complete with new hubs, new discs, new studs, and new bearing races.
|
Our Price: $224.26 each
|
We need to know if you have a 60s or 70s scout. Includes 2 bolts,4 washers,2 nuts. Each scout requires 4 bolts for the front seat and 3 bolts for the back seat.
|
Our Price: $5.83 each
|
If you have a fancy fabric or vinyl interior door panel, These clips are probably what holds it on to the door. These were used on all IH scouts & trucks built in the 1960's. They almost always break when you remove the old corroded ones.
|
Our Price: $2.17 each
|
This body mount kit is an extremely close reproduction of the original bushings used by International Harvester in the 1960s.
Every bump and curve has been reproduced in the smallest detail. These are not plastic washers repackaged to fool you into thinking that these are a body mount kit.
This
|
Our Price: $149.95
|
|
Our Price: $6.43 each
|
Rear main crankshaft seal for international-built V8 and 4-cylinder engines.
let us know if you need the side plugs. Some kits come with out them. Many people reuse old ones.
|
Our Price: $71.84 each
|
We had a really hard time finding these, so we decided to make them ourselves. Replace your old filter with this and stop your oil filter adapter from leaking. If you are updating your older filter with a newer spin-on adapter, you will need one of these.
|
Our Price: $32.53 each
|
***LIMITED QUANTITIES***SOLD EACH ******Very hard to find! New old stock trim moulding clips for Scout II.
YES, THERE ARE FOUR IN THE PHOTO. ALLOWING YOU TO SEE DIFFERENT ANGLES. YOU WILL ONLY RECEIVE ONE AT THIS PRICE. PRICED EACH.
|
Our Price: $38.93 EACH
|
If you get your Scout out on some gravel and apply brake pressure you can determine if either the front or rear brakes are locking up too early. This adjustable proportioning valve allows you to fine tune the front to rear braking pressure.
|
Our Price: $67.72 each
|
This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
|
Our Price: $520.6 CALL FOR AVAILABILITY
|
These are new large "Scout II" decals.
|
Our Price: $30.95 each
|
This barrel clip fits a 1/8" stud and fits into a 11/64th hole, These are the little tiny guys that hold your emblems on in places were you do not have access to, like the back side of the sheet metal.
These were used on your tail gate of your scout to hold on the chrome "INTERNATIONAL".
, 28832
|
Our Price: $2.78 each
|
All of the gas motors in all models of Scout and Scout II use these Champion brand spark plugs. We typically gap spark plugs to .035 when installing, which is very close to the Champion factory gap.
|
Our Price: $5.41 each
|
***many seatbelts made to order, lead time involved, no returns***
Lap belt replacement. Generic black lap belts with mounting hardware. Perfect for those who want the safety of new lap belts without the cost of the OEM seatbelt. Bolts not included.
|
Our Price: $52.4 each
|
This mount is designed to replace the factory mount. It uses polyurethane and nylon bushings.
**This mount is intended for a Scout II with a 4 speed and T-19 transmission.
Made in the USA
|
Our Price: $49.9 each
|
ASK US ABOUT HOW YOU CAN GET A FREE FUEL SENDER.
If your fuel gauge is not working, the likely culprit is a faulty fuel sending unit. These units are used in both the left and right side tanks from 1961-1971. In 1961 the fuel tank was slightly smaller, but uses this same fuel sending unit. Include
|
Our Price: $92.96 each
|
***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the customers with
|
Our Price: $53.13 each
|
Original type temperature sending units screw into the intake manifold near the water jacket, and accept the stock female spade connector. Pipe thread measures 1/2" using ruler.
|
Our Price: $52.63 each
|
Brand New Scout 80/800 windshield seals! Soft and pliable to get you through the next 40 years.
|
Our Price: $146.67 each
| |
