SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

Installation kit necessary for after market steering wheel use on a Scout II. Kit works with any of the three steering wheels that we carry.
Kit includes the adapter to the new steering wheel, the horn contacts, and plate, the mounting hardware, and detailed installation instructions.
|
Our Price: $102.87 each
|

***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the customers with
|
Our Price: $53.13 each
|

***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD***
This is the original International Harvester red color.
Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.
|
Our Price: $80.08 each
|

This LED bulb replaces the side marker lamp in either the front or rear side marker of the Scout II, also works in the dash lamps.
|
Our Price: $11.88 each
|

This kit works on metal tail lights only. Kit includes all of the necessary components to get the rear lights (both sides) working on a Scout II (1971-1975). Most of the tail gaskets have failed on these trucks. The bulb contacts rust from moisture and ruin the rear tail light sockets. Kit includes:
|
Our Price: $96.28 each
|

This is a tail light lens gasket set for the round tail lights used on Scout 80 & 800 and on Travelalls and pickups. See SP10541 for a picture of the lens these mate with.
Each kit contains an inner and an outer gasket required to seal your lens against the weather. These prevent water, dust, an
|
Our Price: $12.95 each
|

This is a brand new shift knob decal for all Scout II, pickup, and Travelall that had 4-speed transmissions. Please specify whether you have Reverse in the up or down position. These are made of the same aluminum foil with black painted overlay, and have adhesive backing to attach to the knob. Th
|
Our Price: $11.95 each
|

Radiator overflow bottle, in combination this a pressure cap, can keep your cooling system healthy for years to come.
Works great for your IH!
|
Our Price: $27.89 each
|

Kit includes:
2- green LEDs for turn signal indicator
1- red "brake failure"
1- amber/yellow "4x engage"
1- blue "high beam"
Chrome on steel body. These lights are not plastic and they will take a real beating.
Requires a 1/2" hole in dash. Made with LED's so they won't drain your battery.
|
Our Price: $32.92 each
|

This easy install wiper blade works with the stock Scout II wiper arms. Some Scout II's have wiper arms that require a small bolt to hold the blade on. Look for two small holes at the end of your wiper arm.
Some Scout II's have a post on the wiper arm.
|
Our Price: $24.95 each
|

This travel top side window seal is a fantastic reproduction of the original. It fits great.
You'll notice that your original seal (or any you ever see on a travel top) has a seam in the center at the bottom of the window. This seal comes in a continuous loop but needs to be cut down slightly to 19
|
Our Price: $184.2 each
|

If you have a 4 cylinder Scout 80, 800 there's a good chance you may need one of these. They tend to have gotten rusty and weak in the last 40 years.
|
Our Price: $23.87 each
|

If you have aftermarket wheels they may be thicker than the originals. These studs are 1-15/16 inch long compared to stock 1-5/8 inch long. If you need longer studs these may work for you.
#wheelbolt
|
Our Price: $7.89 each
|

This clip has myriad uses on old vehicles of all makes. It holds the emergency brake cables at the pedal and in various holding brackets on the frame and in the rear wheel backing plates. It holds the brake hoses in their support brackets on the frame. It holds some of the steel brake lines again
|
Our Price: $3.39 EACH
|

Scout II door plugs also used as Plug button that plugs up a hole. Were used in many applications, anything from covering up a un-used cigarette lighter to a body drain hole. We have these in many sizes. Just give us a call and we will get the size that you need.
|
Our Price: $4.72 each
|

These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|

New window regulator crank handle for. This handle looks exactly like the NOS version, but does not come in an IH box.
This handle was used for the following applications :
1961-1971 Scout 80 / Scout 800
1961-1968 IH Pickup / Travellall
Loadstar / Also fits Graham sports cars.
|
Our Price: $33.12 each
|

Sold in milled steel bare. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it\'s exact! We do not offer these chromed. You can have it chromed if you like, but we do not offer that service.
|
Our Price: $483.97 each
|

THIS KIT IS FOR SCOUT II ONLY. If you have a good gauge and a good fuel tank sender but your gauge still does not work, this is the kit for you. This wiring harness bypasses your stock harness and provides the correct number of ohms to make your gauge read correctly. Scoutparts highly recommends
|
Our Price: $24.72 each
|

This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend
|
Our Price: $29 each
|

These are new plastic fan shrouds for Scout II. These are designed for use with V8 engines, and they will fit 4-cylinder motors too. These may or may not work with the inline engines (258, SD-33). If you have one of those engines, call us anyway to make sure.
|
Our Price: $202.77 each
|

Fits: 1971-77 Scout II & Terra/Traveler
Includes: 4 screws and 4 well nuts, enough to mount both of your rear arm rests
2 of each required per arm rest
|
Our Price: $14.95 Each
|

Fuel sender gasket o-ring for original steel fuel tanks. If you have an aftermarket polyethylene tank, you need SP19180.
|
Our Price: $7.08 each
|

All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|

Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|

These are brand new. They are EXACTLY OEM and will fit Scout 80, Scout 800, and Sport Scout. Please note that due to the use of natural rubber in these cylinders, it is necessary to use a special hydraulic fluid. We recommend using the Lucas fluid (SP10162), which has lubricants added to prolong
|
Our Price: $166.3 each
|

We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|
|