SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Such a cool and unique cap. The waxed cloth has a hardened "old leather" look and feel to it.
Brown washed wax cloth and nylon mesh back cap.
Velcro closure on back.
International Harvester hat
|
Our Price: $19.95 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
406683C1
This fuse panel Has been specifically designed to plug into your old original Scout II wiring without cutting & chopping on the original harness.
Remove the old glass tube panel and plug this into the old harness.
We can update any Scout harness that you order with a new updated blade ty
|
Our Price: $314.01 - $316.22 each
|
Brand-New IH Scout II Accelerator / Throttle Cable Part. This cable is 28-5/8" end to end.
This is the REAL DEAL IH Part. part 440983C1
73-75 6-232/258 engines
To fit the 1973-1978 Scout II with 304 / 345 V8.
This cable has a socket fitting on the carburetor end, and a ball on the gas pedal en
|
Our Price: $99.50 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $149.25 each
|
Brand new interior door handle for Scout 80 and Scout 800.
Exact reproduction of the original handle. Can also be drilled and used as a replacement for bolt on style handles used on some Scouts.
|
Our Price: $13.84 EACH
|
Divorced choke control and used in accelerator linkage of Scout II, Metros, Travelalls, and Pickups. Parts books MT117, 124, 130, 131
|
Our Price: $6.92 each
|
These head lights are halogen and they fit all the IH Scout & Trucks. They are significantly brighter and have a much whiter light.
|
Our Price: $21.76 each
|
395944C1, This little clip was used on just about all IH rigs. This little clip holds on many of your door seals. The earlier ones were metal and have now rusted away.
|
Our Price: $0.90 each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
This seal is made for the lower rear cab top. The original was poorly designed because it allowed the metal of the top to rub against the metal of the bulkhead in direct contact, destroying your paint. This is new and improved!
|
Our Price: $59.95 each
|
Brand new wiper switch for Scout II. Two speed switch, push to wash, internal circuit breaker.
|
Our Price: $89.98 each
|
New Chrome replacement backup light assembly
Fits: Scout 80 Scout 800 1961-71, 1961-68 IH Pickup
- Stamped steel-zinc plated housing
- High impact acrylic clear lens and chrome bezel
- Includes mounting gasket, screws and U-nuts
- Factory style wiring, sleeve and connector
Replaces IH part # 3796
|
Our Price: $69.95 Each
|
Windshield wiper blade for your IH Scout 80 or Scout 800.
(Includes installation instructions)
NO RETURNS
|
Our Price: $19.48 each
|
This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
call for availability and time delay
|
Our Price: $520.60 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
Due to its size, this product must ship by truck freight.
Four point roll cages for Scout II! 1.75" x 14 gauge tubing.
High quality 4-point cage is made from hot rolled electric welded steel tubing, and is designed to give you extra headroom over other cages.
It is also the ideal platform for mo
|
Our Price: $635.22 each
|
All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|
Our challenger type steering wheel has been tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Black foam cushion grip with matte black 3-spokes. 13-3/4" diameter, 2-1/4" dish.
Note : if you don't already have an after-market steering wheel, you w
|
Our Price: $179.42 each
|
If you have an A, B, or C-series Travelall or pickup, and cannot find blades for it, or yours have gotten so bad over the years that you cannot use it anymore, we have the correct replacement blades for you. These are new rubber blades and the bracket or holder that attaches it to the arm. The bla
|
Our Price: $52.81 each
|
2 small and 2 large gaskets for both turn signal lens and bezels
Fits: 1950-55 L & R Series pickup, 1950-55 Travelall
|
Our Price: $21.95
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.40 each
|
Brand New Scout 80/800 windshield seals! Soft and pliable to get you through the next 40 years.
|
Our Price: $146.67 each
|
These hose clamps are made of stainless steel, so they will never rust.
|
Our Price: $2.24 each
|
This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|
This is a brand new shift knob decal for all Scout II, pickup, and Travelall that had 4-speed transmissions. Please specify whether you have Reverse in the up or down position. These are made of the same aluminum foil with black painted overlay, and have adhesive backing to attach to the knob. Th
|
Our Price: $11.95 each
| |
