SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|
Emblems for 71-80 Scout II.
All emblems are sold separately, as well.
This kit includes:
2x New Scout II IH Fender Emblem
2x New Scout II Rear Side "II" Emblem
2x New Scout II Rear Side Emblem
|
Our Price: $389.64
|
The later Scout II trucks with the plastic tail light housings use this replaceable lamp socket. This is the lower of the two sockets, accepts a single contact reverse bulb, and is a direct replacement for you worn or rusted socket.
|
Our Price: $17.67 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|
This is a new knob for the hood release cable on the dashboard. This is the later version which was made of plastic, but can be used to replace the earlier metal knob too. Often these are completely missing, either because they split, or because the cable got stuck and the knob came off. If your
|
Our Price: $29.95 each
|
If you have an A, B, or C-series Travelall or pickup, and cannot find blades for it, or yours have gotten so bad over the years that you cannot use it anymore, we have the correct replacement blades for you. These are new rubber blades and the bracket or holder that attaches it to the arm. The bla
|
Our Price: $42.81 each
|
395944C1, This little clip was used on just about all IH rigs. This little clip holds on many of your door seals. The earlier ones were metal and have now rusted away.
|
Our Price: $0.9 each
|
New window regulator crank handle for. This handle looks exactly like the NOS version, but does not come in an IH box.
This handle was used for the following applications :
1961-1971 Scout 80 / Scout 800
1961-1968 IH Pickup / Travellall
Loadstar / Also fits Graham sports cars.
|
Our Price: $33.12 each
|
Tail light wiring harness (pigtail) for rear tail/brake bulb sockets.
|
Our Price: $32.95 each
|
This body mount kit is an extremely close reproduction of the original bushings used by International Harvester in the 1960s.
Every bump and curve has been reproduced in the smallest detail. These are not plastic washers repackaged to fool you into thinking that these are a body mount kit.
This
|
Our Price: $149.95
|
Sold as a set of four. These are new replacement shackle Plates for Scout 80, 800. They do not come with bolts.
They are within 1/2" of stock height.3" center to center on the holes.
|
Our Price: $50.41 Set of 4
|
This easy install wiper blade works with the stock Scout II wiper arms. Some Scout II's have wiper arms that require a small bolt to hold the blade on. Look for two small holes at the end of your wiper arm.
Some Scout II's have a post on the wiper arm.
|
Our Price: $24.95 each
|
Scout 80/800 from 1961-1971 use this pad for the clutch and brake pedal.
Scout 800, Scout 80
|
Our Price: $32.02 each
|
This kit works on metal tail lights only. Kit includes all of the necessary components to get the rear lights (both sides) working on a Scout II (1971-1975). Most of the tail gaskets have failed on these trucks. The bulb contacts rust from moisture and ruin the rear tail light sockets. Kit includes:
|
Our Price: $96.28 each
|
Such a cool and unique cap. The waxed cloth has a hardened "old leather" look and feel to it.
Brown washed wax cloth and nylon mesh back cap.
Velcro closure on back.
International Harvester hat
|
Our Price: $19.95 each
|
162210R1 - Clip to hold window regulator arms to window for all Scouts 1963-80 and all the others from that period. These also fit full-size Jeep Wagoneers, Grand Wagoneers, and Cherokee door and tailgate windows.
|
Our Price: $18.19 each
|
Oil Pressure Sender For Scout II With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old oil sender with this new updated sender for the most accurate r
|
Our Price: $52.89 each
|
This is a plastic Sheet metal screw nut used in IH head lights, like head light bezels. Also can hold your head light bezel on to your grille.
Fits a #6 Screw and a 5/16" square hole
|
Our Price: $1.48 each
|
Gasket and seal kit for the Dana 20 transfer case used in most Scout II's. Easily identifiable, the Dana 20 had high and low speeds.
|
Our Price: $74.72 each
|
Super good, super strong, super resistant to gas, oil and diesel. Use gloves when applying. So good that it is hard to get off your hands.
This item has to ship ground because it's ORM-D, which makes the freight high to remote locations.
|
Our Price: $15.61 each
|
Hold onto one of these walnut wood steering wheels whenever you drive your Scout!! Tested for fit and finish in your Scout II. A great replacement steering wheel for your 71-80 Scout.
Genuine hardwood walnut finish with black finger grip and satin silver spokes. 4-spoke
13-1/2\" diameter, 2-1/4\"
|
Our Price: $267.45 each
|
Overall width 2" inches. 7/8" outside daimeter. Brand new spring bushings for your Scout 80 or Scout 800. One kit will service one axle and tighten up your ride quality while eliminating squeaks.
Flanged bushings are for 2 inch aftermarket shackles on an 80/800.
|
Our Price: $70.85 each
|
Sold in milled steel bare. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it\'s exact! We do not offer these chromed. You can have it chromed if you like, but we do not offer that service.
|
Our Price: $483.97 each
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $60.17 each
|
So close to original that it\'s difficult to tell the difference. Many states do not require a front plate. Because of this, we have deleted the holes for the license plate.
Same original thickness and original mounting holes. Super close reproduction of factory original.
In stock now.
Fits bot
|
Our Price: $483.97 each
|
#21 in the above diagram is the part you are looking at
#24 is SP18769
#25 is SP10134
These are new side seals for use with the standard steel travel top used on Scout 80 & 800 trucks. These will work on the optional fastback sport top, but will not work on the optional half-cab top. These are mad
|
Our Price: $89.95 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
| |
