SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

Hub and rotor for Scout II with front disc brakes (2WD & 4WD) and for 1974-75 4x4 pickups and Travelalls.
These come complete with new hubs, new discs, new studs, and new bearing races.
|
Our Price: $224.26 each
|

This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|

White plastic door seal retainers. Used on all Scouts of all years.
|
Our Price: $0.9 each
|

New Scout II Glove Box. Cardboard just like OEM, Looks great in your truck!
|
Our Price: $64.75 each
|

Stainless steel bolt kit for your rear bumper. Holds your rear bumper on and will not rust and freeze up. A must for any restoration.
Made in the USA
|
Our Price: $10.58 each
|

Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|

Overall width 2" inches. These spring bushing kits service one axle on your 800A or 800B. 800A and 800B spring bushings are 1.2" in diameter.
These bushings replace the ones located in the spring eyes as well as those located in the spring mounts welded to the frame.
|
Our Price: $70.85 each
|

Finally available are original style transmission and transfer case mounts for your 3 speed Scout 80/800; keep your vehicle to spec while eliminating vibrations.
|
Our Price: $229.89 each
|

Price is for one front and one rear. If you have tinkered with the roll up windows of your scout 80 & 800 and you just can't make them roll up and down smoothly, there's a good chance you need new front
|
Our Price: $74.85 each
|

This 3 piece kit replaces all crucial parts holding the window. It fits all Scout 80 and 800's with rollup windows.
This kit includes the felt, squeegee, and the rear window guide.
Also, check out our Leading Edge Windo
|
Our Price: $64.95 Per Door
|

Brand new wiper switch for Scout II. Two speed switch, push to wash, internal circuit breaker.
|
Our Price: $89.98 each
|

Improve the ride and extend the life of your tires with new shock absorbers for your Scout! This is a gas-charged unit by Monroe, and comes with new powdercoat and new bushings. Eye to stud mounting pattern. See SP16193 for eye to eye pattern. For stock applications only.
|
Our Price: $59.03 each
|

Properly maintained Dana 44 axles can last for hundreds of thousands of miles! Kit replaces Dana 44 rear axle bearings races and seals. One kit: axle bearing, outer axle seal, and inner axle seal for both sides of the axle.
|
Our Price: $217.75 each
|

Sold Each. New tail light lenses for your Scout II 1972 to March 1978 or D-series pickup 1969 to 1975.
This lens will work with your original chrome or plastic housing. After 1978 they went to a plastic bonded housing.
For complete kit or other parts See Item SP20843
|
Our Price: $39.12 EACH
|

These are replacement wheel studs for the front wheels only on Scout IIs with disc brakes. Please specify whether you want right or left-hand threads. Sold each.
|
Our Price: $5.74 each
|

This aftermarket tie rod assembly replaces both the short and long tie rod ends in any Scout 80 or Scout 800 (for 1961-1971 Scouts) To use the high performace tie rod assembly in place of your old tie rod assembly you must change your drag link to a tie-rod style drag link (SP17221).
|
Our Price: $419.91 each
|

This is a Scout II tail gate emblem that says "International". 8" X 1"
These have gotten very scarce for a long time, they are back in a brand new reproduction! 6 inches between pegs.
Tailgate
2754244R1
|
Our Price: $98.95 call for availability
|

Fuel Gas tank Selector switch for Scout 80-800, manual type.
Includes three fuel line connector fittings.
Switches tanks with a 90-degree swing instead of 180-degrees like the original.
|
Our Price: $102.39 CURRENTLY BACKORDERED
|

These hose clamps are made of stainless steel, so they will never rust.
|
Our Price: $2.24 each
|

Dash bulbs for Scout II gauges.
|
Our Price: $2.13 each
|

All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|

We have these little clips that are used inside your Scout II doors.
Includes one left and one right
|
Our Price: $8.88 each
|

This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $18.89 each
|

We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|

Super comfy, one size fits most, red and black plaid IH beanie cap, warm hat.
|
Our Price: $13.48 CALL FOR AVAILABILITY
|

Such a cool and unique cap. The waxed cloth has a hardened "old leather" look and feel to it.
Brown washed wax cloth and nylon mesh back cap.
Velcro closure on back.
International Harvester hat
|
Our Price: $19.95 each
|

Scout II heavy-duty winter wiper blades are in stock and ready to ship. These blades work great with a small modification to the stock wiper arm to allow for the included screw and nylock nut to be used.
|
Our Price: $34.32 each
|
|