SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Transfer case decal for the Scout II.
396642C2
|
Our Price: $14.32 each
|
This clip has myriad uses on old vehicles of all makes. It holds the emergency brake cables at the pedal and in various holding brackets on the frame and in the rear wheel backing plates. It holds the brake hoses in their support brackets on the frame. It holds some of the steel brake lines again
|
Our Price: $3.39 EACH
|
Replaces IH # 367570C1
Fits: 1969-1970 Scout 800A, 1971-80 Scout II, 1969-1975 Pickup and Travelall, 1976-80 Traveler
|
Our Price: $22.95 Each
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $76.21 each
|
Automatic Shift Dial Plate
Park, Reverse, Neutral, Drive, Low Plate
Automatic gear indicator comes as pair - blank and lettered plates
Made in the USA
![](\"/images/usaflag-backed.gif\")
|
Our Price: $58.34 each
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
Gasket kit for exterior door handles used on Scout II, and D-Series Pickup and Travelall. Rubber gaskets keep water out of the door and prevent contact scratching between handle and door. Kit includes 4 gaskets. (2 large, 2 small) (IH# 484575C1, 484576C1, 484574C1, 484573C1)
484575C1 Left, 484576C
|
Our Price: $21.12 - $61.53 each
|
|
Our Price: $14.17 each
|
This is a brand new shift knob decal for all Scout II, pickup, and Travelall that had 4-speed transmissions. Please specify whether you have Reverse in the up or down position. These are made of the same aluminum foil with black painted overlay, and have adhesive backing to attach to the knob. Th
|
Our Price: $11.95 each
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.40 each
|
New aftermarket round side view mirror. Same primitive design as the original, this mounts directly to the upper door hinges (there should be a threaded hole in the front surface of each hinge)..
-MIRROR HEAD ONLY-
|
Our Price: $133.45 EACH
|
Brand new reproduction Scout II liftgate T-handle
Comes with mounting pad, screws and keys
|
Our Price: $299.95 Each
|
Pertronix Ignitor kit for Holley gold box ignition V8 systems.
Kit REPLACES THE PICKUP IN THE DISTRIBUTOR AND ELIMINATES THE GOLD BOX FROM THE IGNITION SYSTEM!!!
This kit will eliminate your gold box problems, increase fuel economy, horsepower, and plug life. Easy to install kit has no moving part
|
Our Price: $188.95 - $220.95 each
|
Sold as a set of four. These are new replacement shackle Plates for Scout 80, 800. They do not come with bolts.
They are within 1/2" of stock height.3" center to center on the holes.
|
Our Price: $50.41 Set of 4
|
Shifter boot for Scout II Automatic transmission. This boot will also work for Scout 800 A & B Single shifter transfer case.
431600c1
|
Our Price: $64.16 Each
|
Rear main crankshaft seal for international-built V8 and 4-cylinder engines.
let us know if you need the side plugs. Some kits come with out them. Many people reuse old ones.
|
Our Price: $71.84 each
|
This is an NOS bolt for the connecting rods.
These are the bolts that attach your piston rods to the crankshaft.
|
Our Price: $29.20 each
|
This mount is designed to replace the factory mount. It uses polyurethane and nylon bushings.
**This mount is intended for a Scout II with a 4 speed and T-19 transmission.
Made in the USA
|
Our Price: $49.90 each
|
New Scout II ignition lock cylinder with keys
Comes with two unbranded keys that do not have the international logo
|
Our Price: $39.95 Each
|
We now have brand new shifter knobs to fit Scout 80, Scout 800, and pickups and Travelalls. This was used on 3 and some 4-speed transmissions used in C, K, KB, M, L, R, S, A, B, and C-series trucks.
Made of phenolic rubber like the original, This has a 3/8" SAE (fine) thread. If this is not c
|
Our Price: $31.53 each
|
This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
|
Our Price: $520.60 each
|
1 pair of brand new hood bumpers for Scout 80/800
5/16-24 thread, 1.25" stud length
Includes jam nuts
|
Our Price: $14.95 Pair
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
Passenger side fuel tank filler neck (hose) for Scout 80 and Scout 800 fuels tanks on the passenger side of the vehicle. This assembly includes the air vent hose, and connects the fuel tank to the filler flange on the rear fender.
See also the Drivers side
|
Our Price: $133.45 each
|
Brand new wiper switch for Scout II. Two speed switch, push to wash, internal circuit breaker.
|
Our Price: $89.98 each
| |
