SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
If your Scout is like mine, most of the time it starts fine, and other times you try to start it and all you get is a click.
With the battery being new and the starter being new, it shouldn\'t happen. Turn the keys 5 or 6 more times and then it might start. The problem often is that your old ignitio
|
Our Price: $68.78 each
|
We have brand new wheel bearing hubs for all Scout II vehicles with either the Dana-44 or Dana-30 axle. These will fit vehicles with either disc or drum brakes. These will also fit 100 and 150 pickups and Travelalls built in 1974 and 1975.
|
Our Price: $190.36 each
|
Plastic heater valve replacement for all Scout 80 & 800, Scout II, Travelalls, and pickups with inline heater valve. While this is not a cadmium-plated steel unit like original, this plastic valve actually moves more easily, and will never rust away like the originals did. Install this and lubrica
|
Our Price: $56.73 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|
No need to cut any wires; connector adapter included in the kit. This courtesty door switch works great on Scout II's, Travelall's and pickups.
This kit includes: adapter pig tail, self-tapping screw, and water proof switch.
****not going to work well for a 60s scout****
|
Our Price: $22.9 each
|
Only Scoutparts.com has this. You will need one on the left and one on the right of your Scout II tailgate.
|
Our Price: $16.95 each
|
Scout 80/800 door check straps made as exact replicas of the factory part. Available in black, and look great on any door. Sold Each.
|
Our Price: $20.59 each
|
These are new replacement bulbs for Scout 800 instrument gauges.
|
Our Price: $1.26 each
|
If you are trying to make your old Window regulator work and or if you have another from another year of scout and you want to reattatch your fan gear, this is the exact rivit that you need to rehab your Window regulator. Used on all IH's from 1940 to 1971
|
Our Price: $15.69 each
|
This part will connect a custom steering wheel to your old Scout. You will retain your horn as well as your turn signal cancel. IT WORKS! You cant get this anywhere else!
This is for a 1961-1971 Scout 80 or 800.
If you need this part for a Scout II, use SP16464
|
Our Price: $67.09 each
|
We need to know if you have a 60s or 70s scout. Includes 2 bolts,4 washers,2 nuts. Each scout requires 4 bolts for the front seat and 3 bolts for the back seat.
|
Our Price: $5.83 each
|
There are 14 screws and special washers here, which are enough screws to affix one Scout II door panel to the door.
|
Our Price: $22.34 each
|
This is a complete set of 9 new LED lights to replace your old incandescent bulbs. You know, the ones that seem to only burn out when you are giving a ride to your mother in-law that does not quite like you...yet.
SPEEDO:
2 Illumination LEDs
2 Turn Signal
1 4x4 Engage
1 E-brake
1 Brights
ALT/FUEL:
|
Our Price: $33.26 set of 9 bulbs and inserts/sockets
|
Sold in milled steel bare. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it\'s exact! We do not offer these chromed. You can have it chromed if you like, but we do not offer that service.
|
Our Price: $483.97 each
|
If you have aftermarket wheels they may be thicker than the originals. These studs are 1-15/16 inch long compared to stock 1-5/8 inch long. If you need longer studs these may work for you.
#wheelbolt
|
Our Price: $7.89 each
|
This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.4 CALL FOR AVAILABILITY
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
This clip replaces the original clip and spacer. It is made of a rigid plastic and will do the job as good as the original.
|
Our Price: $25.2 each
|
THIS KIT IS FOR SCOUT II ONLY. If you have a good gauge and a good fuel tank sender but your gauge still does not work, this is the kit for you. This wiring harness bypasses your stock harness and provides the correct number of ohms to make your gauge read correctly. Scoutparts highly recommends
|
Our Price: $24.72 each
|
these are the real deal!! Dash board light bulb sockets. Lights up heater, head light and wiper indicators, gauges, speedo. fits all IH trucks and Scouts!!
|
Our Price: $5.1 each
|
This mount is designed to replace the factory mount. It uses polyurethane and nylon bushings.
**This mount is intended for a Scout II with a 4 speed and T-19 transmission.
Made in the USA
|
Our Price: $49.9 each
|
This is an NOS bolt for the connecting rods.
These are the bolts that attach your piston rods to the crankshaft.
|
Our Price: $29.2 each
|
This is the actuator for the turn signal switch on Scout II and D-series pickups and Travelalls, Metros, and some later Scout 800 vehicles. This was used in Saginaw steering columns. This is the part that bumps the swinging cam on the turn signal switch, and that causes the signal to shut off afte
|
Our Price: $27.08 each
|
Kit includes:
2- green LEDs for turn signal indicator
1- red "brake failure"
1- amber/yellow "4x engage"
1- blue "high beam"
Chrome on steel body. These lights are not plastic and they will take a real beating.
Requires a 1/2" hole in dash. Made with LED's so they won't drain your battery.
|
Our Price: $32.92 each
|
This is a rebuild kit to fit the Holley Model 1904 as used by Scouts, Travelalls, and pickups. This includes the 152 and 196 4-cylinder motors and engines.
This same carb was used in IH trucks with the 220/240 Black Diamond and the 220/240 Silver Diamond engines.
|
Our Price: $143.76 each
|
Bet you didn't know you can replace that worn out ring gear on your flywheel! If your starter 'sings' to you every time you go to start your truck, you need to replace the ring gear. This is a much cheaper alternative to replacing the flywheel.
This is used on all flywheels used on the IH eng
|
Our Price: $106.59 each
| |
