SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
These are fabulous reproductions! 495512C2
Scout II, Scout Terra, Scout Traveler
|
Our Price: $128.17 each
|
***International Harvester Scout 80/800 hood bumpers available again ***
This hood bumper is made by Scoutparts for the International Harvester Scout 80 & 800. This bumper is an accurate reproduction of the original hood bumper that was used by International.
Made in the USA
Our Price: $13.55 In stock now!
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $18.89 each
|
Gasket and seal kit for the Dana 20 transfer case used in most Scout II's. Easily identifiable, the Dana 20 had high and low speeds.
|
Our Price: $74.72 each
|
Upper windshield frame seal that goes between frame to top
1972-80 Scout II, Terra, and Traveler
452085C2
|
Our Price: $87.54
|
Only Scoutparts.com has this. You will need one on the left and one on the right of your Scout II tailgate.
|
Our Price: $16.95 each
|
We have brand new transfer case shifter knobs for your Scout 80 or 800. These are identical to the original units. It is amazing how much difference little items like these make in your truck restoration. Sold in pairs.
|
Our Price: $19.73 - $126.32 pair
|
These are new plastic fan shrouds for Scout II. These are designed for use with V8 engines, and they will fit 4-cylinder motors too. These may or may not work with the inline engines (258, SD-33). If you have one of those engines, call us anyway to make sure.
|
Our Price: $202.77 each
|
All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH blueprint specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6-cy
|
Our Price: $508.10 - $508.10 each
|
New bolt set for your Scout II travel top. The travel top is the standard top used on 100" wheel base Scout II vehicles. These bolts hold the top down to the body.
|
Our Price: $24.16 each
|
Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
Made in the USA
393953c92 1971-1978
|
Our Price: $184.02 each
|
Passenger side fuel tank filler neck (hose) for Scout 80 and Scout 800 fuels tanks on the passenger side of the vehicle. This assembly includes the air vent hose, and connects the fuel tank to the filler flange on the rear fender.
See also the Drivers side
|
Our Price: $133.45 each
|
***PAINT CANNOT BE SHIPPED TO CALIFORNIA OR ABROAD***
This is the original International Harvester red color.
Must be ordered in case quantity. Ordering 1 = 6 aerosol cans.
|
Our Price: $80.08 each
|
Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|
***many seatbelts made to order, lead time involved, no returns***
Lap belt replacement. Generic black lap belts with mounting hardware. Perfect for those who want the safety of new lap belts without the cost of the OEM seatbelt. Bolts not included.
|
Our Price: $52.4 each
|
Such a cool and unique cap. The waxed cloth has a hardened "old leather" look and feel to it.
Brown washed wax cloth and nylon mesh back cap.
Velcro closure on back.
International Harvester hat
|
Our Price: $19.95 each
|
Brand New Scout 80/800 windshield seals! Soft and pliable to get you through the next 40 years.
|
Our Price: $146.67 each
|
Windshield top to frame seal, also known as the upper windshield seal, this has a 7 bolt pattern. It works for 1965-71 Scouts.
|
Our Price: $41.95
|
Brand New Scout 80/800 windshield seals! Soft and pliable to get you through the next 40 years.
|
Our Price: $146.67 each
|
Brand new interior door handle for Scout 80 and Scout 800.
Exact reproduction of the original handle. Can also be drilled and used as a replacement for bolt on style handles used on some Scouts.
|
Our Price: $12.84
|
This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.4 CALL FOR AVAILABILITY
|
New window regulator crank handle for. This handle looks exactly like the NOS version, but does not come in an IH box.
This handle was used for the following applications :
1961-1971 Scout 80 / Scout 800
1961-1968 IH Pickup / Travellall
Loadstar / Also fits Graham sports cars.
|
Our Price: $33.12 each
|
Priced each. These are very nice reproductions of the forward body mounts (located near the front of of the front floorpan) used on Scout II. Goes under your feet as you drive down the road. The originals have typically rusted away or fatigued to the point they break or bend. Now you can get your
|
Our Price: $92.67 each
|
We have no core fee but, You will need to send us your core before we ship. Clutch kit for Scout II, Travelall, or pickup with 11" clutch. Kit includes 11" pressure plate, clutch disc, throwout and pilot bearing, disc alignment tool and a 2 7/8th or 3 1/4 th inch grease sleeve. When Ordering This
|
Our Price: $684.74 each
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $75.21 each
|
Scout II door plugs also used as Plug button that plugs up a hole. Were used in many applications, anything from covering up a un-used cigarette lighter to a body drain hole. We have these in many sizes. Just give us a call and we will get the size that you need.
|
Our Price: $4.72 each
| |
