SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|
***DASH PAD COVER IS NOT AN EXACT FIT. *** Having a Blemish sale! NO RETURN!!!! --YOU WILL LIKELY HAVE TO RE-DRILL HOLES IN THESE AS THE SCREWS HOLES WILL LIKELY NOT LINE UP WITH THE DASH CORRECTLY--
This is a molded black plastic cover that fits over your old beat up dash pad.
To install simply r
|
Our Price: $168.99
|
Stainless steel bolt kit for your rear bumper. Holds your rear bumper on and will not rust and freeze up. A must for any restoration.
Made in the USA
|
Our Price: $10.58 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
This is a new water pump and gasket. This pump will fit all 4-cylinder and IH V8 engines (152, 196, 266, 304, 345, 392). The hub is drilled with 8 holes; four of those holes are for the standard bolt-on fan, and the other holes allow attachment of the optional bolt-on fan clutch. No matter which
|
Our Price: $148.35 each
|
This barrel clip fits a 1/8" stud and fits into a 11/64th hole, These are the little tiny guys that hold your emblems on in places were you do not have access to, like the back side of the sheet metal.
These were used on your tail gate of your scout to hold on the chrome "INTERNATIONAL".
, 28832
|
Our Price: $2.78 each
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $76.21 each
|
Original type temperature sending units screw into the intake manifold near the water jacket, and accept the stock female spade connector. Pipe thread measures 1/2"
|
Our Price: $52.63 each
|
Only Scoutparts.com has this. You will need one on the left and one on the right of your Scout II tailgate.
|
Our Price: $16.95 each
|
MT130 Parts manual, Scout II, 1971-80. Traveler, Terra. Originally printed material from International Harvester detailing the assembly order and part numbers for each device and system of the Scout vehicle.
|
Our Price: $112.91 each
|
THIS KIT IS FOR SCOUT II ONLY. If you have a good gauge and a good fuel tank sender but your gauge still does not work, this is the kit for you. This wiring harness bypasses your stock harness and provides the correct number of ohms to make your gauge read correctly. Scoutparts highly recommends
|
Our Price: $24.72 each
|
Installation kit necessary for after market steering wheel use on a Scout II. Kit works with any of the three steering wheels that we carry.
Kit includes the adapter to the new steering wheel, the horn contacts, and plate, the mounting hardware, and detailed installation instructions.
|
Our Price: $81.95 each
|
Due to its size, this product must ship by truck freight.
Four point roll cages for Scout II! 1.75" x 14 gauge tubing.
High quality 4-point cage is made from hot rolled electric welded steel tubing, and is designed to give you extra headroom over other cages.
It is also the ideal platform for mo
|
Our Price: $635.22 each
|
Scout 80/800 chrome air cleaner for 4 And 6 cylinder motors. Will also work on Scout II with 6 cylinder engines. Replaces the oil bath air cleaner with a paper air filter. Improves intake air flow, which allows motor to breathe easier. 6.5 inch diameter.
|
Our Price: $134.08 Each
|
This is a Scout II tail gate emblem that says "International". 8" X 1"
These have gotten very scarce for a long time, they are back in a brand new reproduction! 6 inches between pegs.
Tailgate
2754244R1
International badge
|
Our Price: $98.95
|
Pertronix Ignitor kit for Holley gold box ignition V8 systems.
Kit REPLACES THE PICKUP IN THE DISTRIBUTOR AND ELIMINATES THE GOLD BOX FROM THE IGNITION SYSTEM!!!
This kit will eliminate your gold box problems, increase fuel economy, horsepower, and plug life. Easy to install kit has no moving part
|
Our Price: $188.95 - $220.95 each
|
Fuel filter, small glass bowl type for early scouts & trucks.
|
Our Price: $14.95 Each
|
|
Our Price: $6.43 each
|
These are new U-joints to fit the front axle shafts on Dana-44 open-knuckle front axles used in Scout II, Travelalls, and pickups, including 1000, 1100, 1200, 1010, 1110, 1210, 100, 150, and 200 4x4 chassis.
|
Our Price: $46.68 Each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
This seat is a good fit for Scout II. These have to be special-ordered, so there may be an extra week of ship time.
Covered with high quality long lasting vinyl. Reclinable
This seat requires custom fabrication to mount to the stock pedestals.
|
Our Price: $520.60 each
|
These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|
This fuel tank filler neck hose goes between the left side gas tank and the rear quarter panel on a Scout 80 or Scout 800. The flange seals to the outside of the body, and the assembly includes the vent hose as pictured.
We also have a Right side, passenger side available.
fuel tank filler neck l
|
Our Price: $133.45
|
Brand new reproduction Scout II liftgate T-handle
Comes with mounting pad, screws and keys
|
Our Price: $299.95 Each
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
1971-1978 Scout II brake cable
Made in the USA
393953c92 Scout II 1971-1978
|
Our Price: $149.95 each
|
Windshield top to frame seal, also known as the upper windshield seal, this has a 7 bolt pattern. It works for 1965-71 Scouts.
|
Our Price: $41.95
| |
