SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
If you have a 4 cylinder Scout 80, 800 there's a good chance you may need one of these. They tend to have gotten rusty and weak in the last 40 years.
|
Our Price: $23.87 each
|
In stock now! 435317c1
|
Our Price: $9.95 ECH
|
Brand New Scout 80/800 windshield seals! Soft and pliable to get you through the next 40 years.
|
Our Price: $146.67 each
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $75.21 each
|
This is the gasket between the side marker light housing and the body on 1971 to 1980 Scout II
|
Our Price: $4.53 each
|
|
Our Price: $49.16 each
|
Transfer case decal for the Scout II.
396642C2
|
Our Price: $14.32 each
|
The addition of brake calipers may necessitate your choosing a 16" diameter wheel on Scout 80 and 800. These glossy black steel wheels are an excellent alternative to having your new calipers scrape your old 15" wheels. These wheels also look great on a Scout II.
Here are the specs:
5 x 5.5" lug p
|
Our Price: $205.87 each
|
The Scout II shift cable controls the gear shifting for Scout II vehicles equipped with automatic transmissions. Replace your worn or broken shift cable to get that Scout back on the road. 36\"
|
Our Price: $121.66 each
|
Brand new windshield seal for all years of Scout II, Scout II Terra, and Scout II Traveller. This seal is a direct replacement for the worn or leaking seal you may currently have; replacing a bad seal will keep the windshield frame from rusting.
This comes with a black locking strip but accepts a c
|
Our Price: $150.4 each
|
This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|
Replaces IH # 367570C1
Fits: 1969-1970 Scout 800, 1971-80 Scout II, 1969-1975 Pickup and Travelall, 1976-80 Traveler
|
Our Price: $22.95 Each
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
Restoration quality bumper stand-off brackets. Attention to detail makes a good restoration great! ****Priced per offset****.
Made in the USA
|
Our Price: $111.47 EACH
|
This is a brand-new sill scuff plate for the side door thresholds on your Scout II. This is the metal plate that holds the weatherstrip down on the flange and protects it against tearing due to scuffing when you climb in and out of the vehicle.
These are brand new extruded aluminum with standard
|
Our Price: $78.74 each
|
Emblem is for fender badges on all Scout IIs as well as the 1961 to 75 trucks & Travelalls. Dress up that truck with little detail items like this badge.
These are made of base metal and chrome-plated and enamel-painted. These are held on with metal posts on the back side.
|
Our Price: $78.95 each
|
Each kit of polyurethane bushings will service one axle and tighten up your ride quality while eliminating squeaks.
The overall length of these bushings is 2.25 inches, 1.25 outside diameter. this works with stock shackles or our aftermarket shackles.
|
Our Price: $97.98 each
|
Gasket and seal kit for the Dana 20 transfer case used in most Scout II's. Easily identifiable, the Dana 20 had high and low speeds.
|
Our Price: $74.72 each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
Finally available are original style transmission and transfer case mounts for your 3 speed Scout 80/800; keep your vehicle to spec while eliminating vibrations.
|
Our Price: $229.89 each
|
These are aftermarket rubber gaskets, sold in pairs to do 2 doors (2 small pieces, 2 large pieces). For 4 door trucks and Travelalls be sure to order two kits!
Scout 66-71 Scout 800 and 61-68 IH Pickup
(handle not included)
|
Our Price: $19.99 each
|
Improve the ride and extend the life of your tires with new shock absorbers for your Scout! This is a gas-charged unit by Monroe, and comes with new powdercoat and new bushings. Eye to stud mounting pattern. See SP16193 for eye to eye pattern. For stock applications only.
|
Our Price: $59.03 each
|
The later Scout II trucks with the plastic tail light housings use this replaceable lamp socket. This is the lower of the two sockets, accepts a single contact reverse bulb, and is a direct replacement for you worn or rusted socket.
|
Our Price: $17.67 each
|
These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|
Scout 80 new replacement exterior door handles. These handles come with keys. These are an excellent non-oem replacement to add to any quality restoration.
These handles may also be used on Metros
|
Our Price: $68.82
|
Sold in milled steel bare. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it\'s exact! We do not offer these chromed. You can have it chromed if you like, but we do not offer that service.
|
Our Price: $483.97 each
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $18.89 each
| |
