SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
New window regulator crank handle for. This handle looks exactly like the NOS version, but does not come in an IH box.
This handle was used for the following applications :
1961-1971 Scout 80 / Scout 800
1961-1968 IH Pickup / Travellall
Loadstar / Also fits Graham sports cars.
|
Our Price: $33.12 each
|
In stock now! 435317c1
|
Our Price: $9.95 ECH
|
Replaces IH # 367570C1
Fits: 1969-1970 Scout 800, 1971-80 Scout II, 1969-1975 Pickup and Travelall, 1976-80 Traveler
|
Our Price: $22.95 Each
|
Gasket kit for exterior door handles used on Scout II, and D-Series Pickup and Travelall. Rubber gaskets keep water out of the door and prevent contact scratching between handle and door. Kit includes 4 gaskets. (2 large, 2 small) (IH# 484575C1, 484576C1, 484574C1, 484573C1)
484575C1 Left, 484576C
|
Our Price: $21.12 - $61.53 each
|
Plastic heater valve replacement for all Scout 80 & 800, Scout II, Travelalls, and pickups with inline heater valve. While this is not a cadmium-plated steel unit like original, this plastic valve actually moves more easily, and will never rust away like the originals did. Install this and lubrica
|
Our Price: $56.73 each
|
This is a NEW Rubber bumper for your adjustable hood stop. You will be able to close your hood with out damaging your paint and it will also stop your hood from fluttering when you're driving over 30 miles per hour.
|
Our Price: $13.52 Each
|
ASK US ABOUT HOW YOU CAN GET A FREE FUEL SENDER.
If your fuel gauge is not working, the likely culprit is a faulty fuel sending unit. These units are used in both the left and right side tanks from 1961-1971. In 1961 the fuel tank was slightly smaller, but uses this same fuel sending unit. Include
|
Our Price: $92.96 each
|
Radiator overflow bottle, in combination this a pressure cap, can keep your cooling system healthy for years to come.
Works great for your IH!
|
Our Price: $27.89 each
|
All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH blueprint specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6-cy
|
Our Price: $508.10 - $508.10 each
|
These hose clamps are made of stainless steel, so they will never rust.
|
Our Price: $2.24 each
|
Improve the ride and extend the life of your tires with new shock absorbers for your Scout! This is a gas-charged unit by Monroe, and comes with new powdercoat and new bushings. Eye to stud mounting pattern. See SP16193 for eye to eye pattern. For stock applications only.
|
Our Price: $59.03 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|
***Scout II top door seal special, proudly made in the USA*** Scout II door felt and squeegee for resealing the top of door opening of Scout II doors. These are the real deal, your windows won't rattle and will look original.
You will need 2 kits.
481437C1, 395872c1, 395873c1 - Inner 481437c1, 39
|
Our Price: $72.37 each
|
So close to original that it\'s difficult to tell the difference. Many states do not require a front plate. Because of this, we have deleted the holes for the license plate.
Same original thickness and original mounting holes. Super close reproduction of factory original.
In stock now.
Fits bot
|
Our Price: $483.97 each
|
Price is for one front and one rear. If you have tinkered with the roll up windows of your scout 80 & 800 and you just can't make them roll up and down smoothly, there's a good chance you need new front
|
Our Price: $74.85 each
|
This is the gasket between the side marker light housing and the body on 1971 to 1980 Scout II
|
Our Price: $4.53 each
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $18.89 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
Stainless steel bolt kit for your rear bumper. Holds your rear bumper on and will not rust and freeze up. A must for any restoration.
Made in the USA
|
Our Price: $10.58 each
|
These are new plastic fan shrouds for Scout II. These are designed for use with V8 engines, and they will fit 4-cylinder motors too. These may or may not work with the inline engines (258, SD-33). If you have one of those engines, call us anyway to make sure.
|
Our Price: $202.77 each
|
Foam gasket between the steel tail light housing and the body on early scout II's and D line pickups
|
Our Price: $9.08 each
|
THIS KIT IS FOR SCOUT II ONLY. If you have a good gauge and a good fuel tank sender but your gauge still does not work, this is the kit for you. This wiring harness bypasses your stock harness and provides the correct number of ohms to make your gauge read correctly. Scoutparts highly recommends
|
Our Price: $24.72 each
|
These are the plastic pivot bushings or bearings used on Scout 80 and 800, Scout II, and D-series pickups and Travelalls without hydraulic clutches. These fit inside the end of the bellcrank (also known as the clutch relay lever or cross shaft) around the each of the round balls on the frame and th
|
Our Price: $48.67 each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
2753948r1. Fits: 1966-1971 Scout 800, 800A, 800B
Die cast design like the original
Chrome plates and textured on the inside
Includes retaining clips
|
Our Price: $48.9
|
Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|
This clip has myriad uses on old vehicles of all makes. It holds the emergency brake cables at the pedal and in various holding brackets on the frame and in the rear wheel backing plates. It holds the brake hoses in their support brackets on the frame. It holds some of the steel brake lines again
|
Our Price: $3.39 EACH
| |
