SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|
White plastic door seal retainers. Used on all Scouts of all years.
|
Our Price: $0.9 each
|
Fuel Gas tank Selector switch for Scout 80-800, manual type.
Includes three fuel line connector fittings.
Switches tanks with a 90-degree swing instead of 180-degrees like the original.
|
Our Price: $102.39 CURRENTLY BACKORDERED
|
This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend
|
Our Price: $29 each
|
We have brand new wheel bearing hubs for all Scout II vehicles with either the Dana-44 or Dana-30 axle. These will fit vehicles with either disc or drum brakes. These will also fit 100 and 150 pickups and Travelalls built in 1974 and 1975.
|
Our Price: $190.36 each
|
Brand new taillight lens for 1961-71 Scout 80 and 800, 1961-1969 IH Pickup and Travelall. Just like the original minus the IH logo in the center.
Sold Each
replaces 210610R91
Gaskets can be found on SP10539
|
Our Price: $21.95 Each
|
Newly designed Scout II rear lift gate T handle. Locking, with keys, these even come with new screws. These are the last latch handles available, and when these run out they are gone forever!
#liftgatehandle #scouthandle #scoutliftgatehandle #scoutthandle #scouthatch 395924C1
|
Our Price: $124.52 Coming Soon!
|
Pertronix Ignitor kit for Holley gold box ignition V8 systems.
Kit REPLACES THE PICKUP IN THE DISTRIBUTOR AND ELIMINATES THE GOLD BOX FROM THE IGNITION SYSTEM!!!
This kit will eliminate your gold box problems, increase fuel economy, horsepower, and plug life. Easy to install kit has no moving part
|
Our Price: $188.95 - $220.95 each
|
If you have an A, B, or C-series Travelall or pickup, and cannot find blades for it, or yours have gotten so bad over the years that you cannot use it anymore, we have the correct replacement blades for you. These are new rubber blades and the bracket or holder that attaches it to the arm. The bla
|
Our Price: $42.81 each
|
We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|
This 3 piece kit replaces all crucial parts holding the window. It fits all Scout 80 and 800's with rollup windows.
This kit includes the felt, squeegee, and the rear window guide.
Also, check out our Leading Edge Windo
|
Our Price: $64.95 Per Door
|
So close to original that it\'s difficult to tell the difference. Many states do not require a front plate. Because of this, we have deleted the holes for the license plate.
Same original thickness and original mounting holes. Super close reproduction of factory original.
In stock now.
Fits bot
|
Our Price: $483.97 each
|
In stock now! 435317c1
|
Our Price: $9.95 ECH
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|
Super comfy, one size fits most, red and black plaid IH beanie cap, warm hat.
|
Our Price: $13.48 CALL FOR AVAILABILITY
|
This is brand new vented fuel cap to fit all International trucks.
This also fits other trucks too, as well as tractors and industrial engine fuel tanks.
|
Our Price: $21.26 each
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $76.21 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
This is a rebuild kit to fit the Holley Model 1904 as used by Scouts, Travelalls, and pickups. This includes the 152 and 196 4-cylinder motors and engines.
This same carb was used in IH trucks with the 220/240 Black Diamond and the 220/240 Silver Diamond engines.
|
Our Price: $143.76 each
|
This is an NOS bolt for the connecting rods.
These are the bolts that attach your piston rods to the crankshaft.
|
Our Price: $29.2 each
|
head light headLight Switch, Scout II.
|
Our Price: $76.77 each
|
New Scout II Glove Box. Cardboard just like OEM, Looks great in your truck!
|
Our Price: $64.75 each
|
Sold in milled steel bare. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it\'s exact! We do not offer these chromed. You can have it chromed if you like, but we do not offer that service.
|
Our Price: $483.97 each
| |
