SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
If you have a fancy fabric or vinyl interior door panel, These clips are probably what holds it on to the door. These were used on all IH scouts & trucks built in the 1960's. They almost always break when you remove the old corroded ones.
|
Our Price: $2.17 each
|
White plastic door seal retainers. Used on all Scouts of all years.
|
Our Price: $0.9 each
|
A lot of Scouts have a tapping sound in the engine from noisy or sticking lifters. These brand new lifters are correct for the following engines:
152CI 4 cylinder
196Ci 4 cylinder
266CI 6 cylinder
304Ci 8 cylinder
345CI 8 cylinder
392CI 8 cylinder
|
Our Price: $29.95 each
|
Original type temperature sending units screw into the intake manifold near the water jacket, and accept the stock female spade connector. Pipe thread measures 1/2" using ruler.
|
Our Price: $52.63 each
|
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp guage. NO MOVING PARTS!! This regulator has a capacity far beyond the original and will never burn out under these loads.
|
Our Price: $59.03 each
|
Foam gasket between the steel tail light housing and the body on early scout II's and D line pickups
|
Our Price: $9.08 each
|
Scout 80/800 chrome air cleaner for 4 And 6 cylinder motors. Will also work on Scout II with 6 cylinder engines. Replaces the oil bath air cleaner with a paper air filter. Improves intake air flow, which allows motor to breathe easier. 6.5 inch diameter.
|
Our Price: $125.76 each
|
Kit includes one pair of motor mounts and hardware to mount a 4 cylinder motor in a Scout 1961-71.
|
Our Price: $178.87 each
|
Water Temp Sender For Scout 2 With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old water temp sender with this new updated sender for the most accura
|
Our Price: $41.87 each
|
Kit includes 2 high quality heavy duty shackles and hardware necessary to mount them on either the front or rear springs of any Scout 80 or Scout 800. Purchase 2 kits if you want to do both front and rear.
These shackles are an excellent way to get some extra tire clearance or accomodate lift spri
|
Our Price: $144.74 - $144.74 each
|
This 3 piece kit replaces all crucial parts holding the window. It fits all Scout 80 and 800's with rollup windows.
This kit includes the felt, squeegee, and the rear window guide.
Also, check out our Leading Edge Windo
|
Our Price: $64.95 Per Door
|
We only have three. New Old Stock.
This is the best side view mirror to use for your Scout II. New old stock mirror made by IH in the 1970's. This is the replacement mirror that your IH dealer would have sold you in 1970's.
- Mounting holes may need to be re-drilled -
|
Our Price: $742.99 EACH
|
This is the actuator for the turn signal switch on Scout II and D-series pickups and Travelalls, Metros, and some later Scout 800 vehicles. This was used in Saginaw steering columns. This is the part that bumps the swinging cam on the turn signal switch, and that causes the signal to shut off afte
|
Our Price: $27.08 each
|
406683C1
This fuse panel Has been specifically designed to plug into your old original Scout II wiring without cutting & chopping on the original harness.
Remove the old glass tube panel and plug this into the old harness.
We can update any Scout harness that you order with a new updated blade ty
|
Our Price: $314.01 - $314.01 each
|
Door Check Strap Mounting Bracket! Nickel plated bracket, secures door check strap to the door.
|
Our Price: $5.85 each
|
Pin; straight interior handle for window and door.
Holds interior handles on the inside of door.
|
Our Price: $10.17 per pin
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $60.17 each
|
These are the plastic pivot bushings or bearings used on Scout 80 and 800, Scout II, and D-series pickups and Travelalls without hydraulic clutches. These fit inside the end of the bellcrank (also known as the clutch relay lever or cross shaft) around the each of the round balls on the frame and th
|
Our Price: $48.67 each
|
We now have brand new shifter knobs to fit Scout 80, Scout 800, and pickups and Travelalls. This was used on 3 and some 4-speed transmissions used in C, K, KB, M, L, R, S, A, B, and C-series trucks.
Made of phenolic rubber like the original, This has a 3/8" SAE (fine) thread. If this is not c
|
Our Price: $31.53 each
|
***seat belts currently made to order, lead time involved***
These 3 point seat belts have an adjustable buckle lead. They are much safer than the original 2 point seat belts.
They are NOT the type that the factory installed.
To use these seat belts you will have to fabricate a 3rd anchor point.
|
Our Price: $141.27 each
|
This is a new knob for the hood release cable on the dashboard. This is the later version which was made of plastic, but can be used to replace the earlier metal knob too. Often these are completely missing, either because they split, or because the cable got stuck and the knob came off. If your
|
Our Price: $29.95 each
|
ASK US ABOUT HOW YOU CAN GET A FREE FUEL SENDER.
If your fuel gauge is not working, the likely culprit is a faulty fuel sending unit. These units are used in both the left and right side tanks from 1961-1971. In 1961 the fuel tank was slightly smaller, but uses this same fuel sending unit. Include
|
Our Price: $92.96 each
|
Hose connects the plastic or metal fuel filler neck to the fuel tank, and is a direct replacement for the original hose.
This is a nice, industrial, heavy duty hose. (Be careful of the heavy metal wires embedded in the tubing.)
|
Our Price: $38.4 each
|
Twin stick transfer case shifting instructions decal for Scout 80 and 800 vehicles.
decal, scout, binder, transfer case, decal, international harvester
2752604R2
|
Our Price: $32.2 each
|
Holds your fuel tank in place. They are sold in pairs. The straps are 36" by 2" and come galvanized.
|
Our Price: $61.67 each
|
This is a rebuild kit to fit the Holley Model 1904 as used by Scouts, Travelalls, and pickups. This includes the 152 and 196 4-cylinder motors and engines.
This same carb was used in IH trucks with the 220/240 Black Diamond and the 220/240 Silver Diamond engines.
|
Our Price: $143.76 each
| |
