SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
393250C2 - Most Scout II's with either 4 speed manual or automatic transmission use this transmission mount assembly. One side of the mount attaches to the transmission housing and the other side mounts to the cross member. This should also fit stock 1971-1974s with 3spd or 4spd manuals.
|
Our Price: $71.56 each
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
We have brand new transfer case shifter knobs for your Scout 80 or 800. These are identical to the original units. It is amazing how much difference little items like these make in your truck restoration. Sold in pairs.
|
Our Price: $19.73 - $126.32 pair
|
This LED bulb replaces the side marker lamp in either the front or rear side marker of the Scout II, also works in the dash lamps.
|
Our Price: $11.88 each
|
All Scout II vehicles use this tail lamp housing gasket between the metal or plastic (depending on year) housing and the body. Without this gasket the tail lamp housing fills with water, the contacts corrode, and eventually the bulb fails.
1971-78 Scout II, 1969-75 IH Pickup
soft cork material
repl
|
Our Price: $14.75 each
|
Fits: 1971-77 Scout II & Terra/Traveler
Includes: 4 screws and 4 well nuts, enough to mount both of your rear arm rests
2 of each required per arm rest
|
Our Price: $14.95 Each
|
Rear extended brake lines for Scout II with drum brakes are 5" longer than stock to accomodate 4" lift kits. Our lines are braided stainless, and sheathed to ensure years of duty.
Vehicle uses one hose in the center of the rear axle. This is only one hose you're buying.
|
Our Price: $97.58 each
|
New aftermarket round side view mirror. Same primitive design as the original, this mounts directly to the upper door hinges (there should be a threaded hole in the front surface of each hinge)..
-MIRROR HEAD ONLY-
|
Our Price: $133.45 EACH
|
Hub and rotor for Scout II with front disc brakes (2WD & 4WD) and for 1974-75 4x4 pickups and Travelalls.
These come complete with new hubs, new discs, new studs, and new bearing races.
|
Our Price: $224.26 each
|
We had a really hard time finding these, so we decided to make them ourselves. Replace your old filter with this and stop your oil filter adapter from leaking. If you are updating your older filter with a newer spin-on adapter, you will need one of these.
|
Our Price: $32.53 each
|
Sold Each. New tail light lenses for your Scout II 1972 to March 1978 or D-series pickup 1969 to 1975.
This lens will work with your original chrome or plastic housing. After 1978 they went to a plastic bonded housing.
For complete kit or other parts See Item SP20843
|
Our Price: $39.12 EACH
|
These are new shifter decals for your Scout 80s and Scout 800s with 3-speed transmissions.
|
Our Price: $12.95 each
|
This travel top side window seal is a fantastic reproduction of the original. It fits great.
You'll notice that your original seal (or any you ever see on a travel top) has a seam in the center at the bottom of the window. This seal comes in a continuous loop but needs to be cut down slightly to 19
|
Our Price: $184.2 each
|
The later Scout II trucks used a plastic tail light housing. This is the replacement lamp socket for the upper socket which holds the tail and brake lamp (dual contact). Buy this socket if your old one is rusted and will not accept a tail lamp.
Made in the USA
 |
Our Price: $17.67 each
|
This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|
Scout 80/800 clutch slave cylinder stainless steel hose. This replaces the rubber hose connection to the slave cylinder, and is sold complete with all necessary hydraulic fittings.
|
Our Price: $75.21 each
|
Emblem is for fender badges on all Scout IIs as well as the 1961 to 75 trucks & Travelalls. Dress up that truck with little detail items like this badge.
These are made of base metal and chrome-plated and enamel-painted. These are held on with metal posts on the back side.
|
Our Price: $78.95 each
|
Gasket that goes on the top of your Scout 80, Scout 800 gas tank. Need one per gas tank. This gasket is only used on original metal fuel tanks.
|
Our Price: $11.42 each
|
For #8 Screw.
|
Our Price: $1.44 each
|
The addition of brake calipers may necessitate your choosing a 16" diameter wheel on Scout 80 and 800. These glossy black steel wheels are an excellent alternative to having your new calipers scrape your old 15" wheels. These wheels also look great on a Scout II.
Here are the specs:
5 x 5.5" lug p
|
Our Price: $205.87 each
|
***You are ordering the pin pictured, if you want the slave cylinder order sp11773***
Fits Scout 80 and 800 with hydraulic clutches, extra heavy duty service. Clutch Slave Cylinder actuator pin. This part was made 3/16 longer than original equipment. Specifically manufactured for the customers with
|
Our Price: $53.13 each
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $60.17 each
|
These are new U-joints to fit the front axle shafts on Dana-44 open-knuckle front axles used in Scout II, Travelalls, and pickups, including 1000, 1100, 1200, 1010, 1110, 1210, 100, 150, and 200 4x4 chassis.
|
Our Price: $46.68 each
|
these are the real deal!! Dash board light bulb sockets. Lights up heater, head light and wiper indicators, gauges, speedo. fits all IH trucks and Scouts!!
|
Our Price: $5.1 each
|
***International Harvester Scout 80/800 hood bumpers available again ***
This hood bumper is made by Scoutparts for the International Harvester Scout 80 & 800. This bumper is an accurate reproduction of the original hood bumper that was used by International.
Made in the USA
Our Price: $13.55 In stock now!
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
Gasket kit for exterior door handles used on Scout II, and D-Series Pickup and Travelall. Rubber gaskets keep water out of the door and prevent contact scratching between handle and door. Kit includes 4 gaskets. (2 large, 2 small) (IH# 484575C1, 484576C1, 484574C1, 484573C1)
484575C1 Left, 484576C
|
Our Price: $21.12 - $61.53 each
| |
