SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Overall width 2" inches. 7/8" outside daimeter. Brand new spring bushings for your Scout 80 or Scout 800. One kit will service one axle and tighten up your ride quality while eliminating squeaks.
Flanged bushings are for 2 inch aftermarket shackles on an 80/800.
|
Our Price: $70.85 each
|
Kit includes one spring for each door lock mechanism.
|
Our Price: $25.30 IN STOCK NOW! EACH
|
Rear main crankshaft seal for international-built V8 and 4-cylinder engines.
let us know if you need the side plugs. Some kits come with out them. Many people reuse old ones.
|
Our Price: $71.84 each
|
This is a complete kit for your Scout 80 & 800 , it includes both battery cables and the engine ground strap. This kit will eliminate many electrical problems and make your Scout much more reliable. Intended for use with 4 cylinder engine.
|
Our Price: $102.87 each
|
This mount is designed to replace the factory mount. It uses polyurethane and nylon bushings.
**This mount is intended for a Scout II with a 4 speed and T-19 transmission.
Made in the USA
|
Our Price: $49.90 each
|
New lined-cardboard Scout 800 Glove Box. Looks great in your truck!
|
Our Price: $43.12 each
|
Gasket kit for exterior door handles used on Scout II, and D-Series Pickup and Travelall. Rubber gaskets keep water out of the door and prevent contact scratching between handle and door. Kit includes 4 gaskets. (2 large, 2 small) (IH# 484575C1, 484576C1, 484574C1, 484573C1)
484575C1 Left, 484576C
|
Our Price: $21.12 - $61.53 each
|
This valve seat retains the valve spring. these are used on all IH 4 and 8 cylinder engines.
|
Our Price: $11.76 each
|
these are the real deal!! Dash board light bulb sockets. Lights up heater, head light and wiper indicators, gauges, speedo. fits all IH trucks and Scouts!!
|
Our Price: $5.10 each
|
Easy to install - NO soldering MUST BE GROUNDED!
Continuous voltage regulator (CVR) for Early and late International Harvester Scout and trucks. Will most likely fit Volkswagen and other vehicles.
If your gauges are reading incorrectly or not at all, you may need this brand-new high-capacity so
|
Our Price: $70.57 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|
The later Scout II trucks used a plastic tail light housing. This is the replacement lamp socket for the upper socket which holds the tail and brake lamp (dual contact). Buy this socket if your old one is rusted and will not accept a tail lamp.
Made in the USA
|
Our Price: $17.67 each
|
New Scout II Glove Box. Cardboard just like OEM, Looks great in your truck!
|
Our Price: $64.75 each
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.40 each
|
***many seatbelts made to order, lead time involved, no returns***
Lap belt replacement. Generic black lap belts with mounting hardware. Perfect for those who want the safety of new lap belts without the cost of the OEM seatbelt. Bolts not included.
|
Our Price: $52.40 each
|
***seat belts currently made to order, lead time involved***
These 3 point seat belts have an adjustable buckle lead. They are much safer than the original 2 point seat belts.
They are NOT the type that the factory installed.
To use these seat belts you will have to fabricate a 3rd anchor point.
|
Our Price: $141.27 each
|
If you have a 4 cylinder Scout 80, 800 there's a good chance you may need one of these. They tend to have gotten rusty and weak in the last 40 years.
|
Our Price: $23.87 each
|
Newly manufactured "All Wheel Drive" emblem for Scout 80/800.
|
Our Price: $75.62 Each
|
Passenger side fuel tank filler neck (hose) for Scout 80 and Scout 800 fuels tanks on the passenger side of the vehicle. This assembly includes the air vent hose, and connects the fuel tank to the filler flange on the rear fender.
See also the Drivers side
|
Our Price: $133.45 each
|
The later Scout II trucks with the plastic tail light housings use this replaceable lamp socket. This is the lower of the two sockets, accepts a single contact reverse bulb, and is a direct replacement for you worn or rusted socket.
|
Our Price: $17.67 each
|
FITS ORIGINAL SCOUT II GAS CAP
This fuel filler tube is a reproduction of the original. It is new, made of steel, and fits both Scout II gas and diesel, 19 and 33 gallon tank.
Will fit standard (SP12935) gas cap as well as our aftermarket locking gas caps (SP13749)
|
Our Price: $296.24 each
|
Brand New Scout 80/800 windshield seals! Soft and pliable to get you through the next 40 years.
|
Our Price: $146.67 each
|
We have brand new transfer case shifter knobs for your Scout 80 or 800. These are identical to the original units. It is amazing how much difference little items like these make in your truck restoration. Sold in pairs.
|
Our Price: $19.73 - $126.32 pair
|
1961-1967 Scout 80 and 800 could have Detroit or Cleveland type universal joints (as pictured). These U-joints have an internal lock ring instead of the external ring outside the cap. The cap diameter is about an inch and they are used on the Dana 27.
|
Our Price: $54.06 each
|
442984C1, Brand new blower motor for your Scout or 61-68 Travelall or pickup. Unit is 2 speed with wires attached; plug it in and go.
|
Our Price: $297.66 each
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $19.89 each
|
The Scout II shift cable controls the gear shifting for vehicles equipped with T-407 (727A) automatic transmission. Replace your worn or broken shift cable to get that Scout back on the road. 36"
|
Our Price: $124.95 Each
| |
