SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
|
Our Price: $6.43 each
|
This is a complete kit for your Scout 80 & 800 , it includes both battery cables and the engine ground strap. This kit will eliminate many electrical problems and make your Scout much more reliable. Intended for use with 4 cylinder engine.
|
Our Price: $102.87 each
|
Now you can rebuild your own power steering gear with our rebuild kit! This comes with all of the seals, gaskets, and bearings required to rebuild your Saginaw power steering box at home.
Recirculating balls are not included, nor are they typically required.
We also can rebuild your old ste
|
Our Price: $154.25 each
|
New replacement Scout II side marker kit with satin black bezels
Fits: Scout II, Scout Terra/Traveler, D Series Pickup/Travelall
Includes:
4 die-cast metal marker bezels
2 amber lights and 2 red lights
Pre-installed foam gaskets
8 screws and 4 retainer clips
We also have these in the classic chro
|
Our Price: $149.95 Full Set
|
Holds your fuel tank in place. They are sold in pairs. The straps are 36" by 2" and come galvanized.
|
Our Price: $71.67 each
|
Sold in milled steel bare, or Chome. These are brand new bumpers made by Scout Parts and are exact copies of the original factory bumper. This is not just a look-alike, it's exact!
|
Our Price: $483.97 - $1499.56 each
|
Overall width 2" inches. 7/8" outside daimeter. Brand new spring bushings for your Scout 80 or Scout 800. One kit will service one axle and tighten up your ride quality while eliminating squeaks.
Flanged bushings are for 2 inch aftermarket shackles on an 80/800.
|
Our Price: $70.85 each
|
The addition of brake calipers may necessitate your choosing a 16" diameter wheel on Scout 80 and 800. These glossy black steel wheels are an excellent alternative to having your new calipers scrape your old 15" wheels. These wheels also look great on a Scout II.
Here are the specs:
5 x 5.5" lug p
|
Our Price: $109.46 each
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $60.17 each
|
Kit designed to allow a pre-1985 Chevy 350 motor to be mounted in a Scout II. These Universal engine mounts are designed for use on all types of 4WD and 2WD vehicles that have frame rail widths
up to 32". The bracket can be either welded or bolted into position. Kit includes hardware, mounts and bra
|
Our Price: $249.4 each
|
New turn signal switch for your 1971-1976 IH Scout II.
(Looking for that hard-to-find 77-80 Turn Signal Swith? We've got it! See "related parts" below)
|
Our Price: $79.96 each
|
Every scout 80/800 needs 4 of these. The hole size is 1 3/8", which may not be stock depending on your year.
Front and rear shackle mount Scout 80/800
|
Our Price: $64.42
|
For #8 Screw.
|
Our Price: $1.44 each
|
Scout II heavy-duty winter wiper blades are in stock and ready to ship. These blades work great with a small modification to the stock wiper arm to allow for the included screw and nylock nut to be used.
|
Our Price: $34.32 each
|
These are new large "Scout II" decals.
|
Our Price: $30.95 each
|
This is a new water pump and gasket. This pump will fit all 4-cylinder and IH V8 engines (152, 196, 266, 304, 345, 392). The hub is drilled with 8 holes; four of those holes are for the standard bolt-on fan, and the other holes allow attachment of the optional bolt-on fan clutch. No matter which
|
Our Price: $148.35 each
|
This barrel clip fits a 1/8" stud and fits into a 11/64th hole, These are the little tiny guys that hold your emblems on in places were you do not have access to, like the back side of the sheet metal.
These were used on your tail gate of your scout to hold on the chrome "INTERNATIONAL".
, 28832
|
Our Price: $2.78 each
|
***many seatbelts made to order, lead time involved, no returns***
Lap belt replacement. Generic black lap belts with mounting hardware. Perfect for those who want the safety of new lap belts without the cost of the OEM seatbelt. Bolts not included.
|
Our Price: $52.4 each
|
Dash bulbs for Scout II gauges.
|
Our Price: $2.13 each
|
This is a factory-authorized reprint of the CTS-2302 service manual for all Scout 80 and 800 trucks. This is not anything like a Chilton's or a Haynes manual, but is a 400 page factory technical service manual with complete instructions and illustrations to guide you in your work. This does not h
|
Our Price: $104.89 - $124.81 each
|
Fuel Gas tank Selector switch for Scout 80-800, manual type.
Includes three fuel line connector fittings.
Switches tanks with a 90-degree swing instead of 180-degrees like the original.
|
Our Price: $102.39
|
Bet you didn't know you can replace that worn out ring gear on your flywheel! If your starter 'sings' to you every time you go to start your truck, you need to replace the ring gear. This is a much cheaper alternative to replacing the flywheel.
This is used on all flywheels used on the IH eng
|
Our Price: $106.59 each
|
This seal is made for the lower rear cab top. The original was poorly designed because it allowed the metal of the top to rub against the metal of the bulkhead in direct contact, destroying your paint. This is new and improved!
|
Our Price: $59.95 each
|
Scout 80/800 from 1961-1971 use this pad for the clutch and brake pedal.
Scout 800, Scout 80
|
Our Price: $32.02 each
|
If you have a 4 cylinder Scout 80, 800 there's a good chance you may need one of these. They tend to have gotten rusty and weak in the last 40 years.
|
Our Price: $23.87 each
|
The later Scout II trucks with the plastic tail light housings use this replaceable lamp socket. This is the lower of the two sockets, accepts a single contact reverse bulb, and is a direct replacement for you worn or rusted socket.
|
Our Price: $17.67 each
|
For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
| |
