SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
The Super Scout or SS II used this front grill. These high-quality replacements can be used on 1976-1979 Scout II and are a great upgrade. You will need to modify your stock front sheet metal to accept this piece. Made in the USA
Dress up your Scout with this attractive black grill insert. Fits all
|
Our Price: $282.28 EACH
|
After market non-oem Stainless Steel head light bezel rings. Excellent restoration piece. 9.25" OD 7.25" ID.
APPLICATION DETAILS:
1961-71 Scout-very close to original look
1941-49 K/KB- Fit all models with close to original look
|
Our Price: $39.95 EACH
|
Each order comes with 2 gaskets that seals 1 lens (1 small and 1 large gasket). Works on the round taillight lens for Scout 80, Scout 800, and 1961-68 C-Series truck and Travelall.
To seal both lens, order 2 kits.
|
Our Price: $12.95 Each
|
FITS ORIGINAL SCOUT II GAS CAP
This fuel filler tube is a reproduction of the original. It is new, made of steel, and fits both Scout II gas and diesel, 19 and 33 gallon tank.
Will fit standard (SP12935) gas cap as well as our aftermarket locking gas caps (SP13749)
|
Our Price: $296.24 each
|
Scout 80/800 door check straps made as exact replicas of the factory part. Available in black, and look great on any door. Sold Each.
|
Our Price: $20.59 each
|
***seat belts currently made to order, lead time involved***
These 3 point seat belts have an adjustable buckle lead. They are much safer than the original 2 point seat belts.
They are NOT the type that the factory installed.
To use these seat belts you will have to fabricate a 3rd anchor point.
|
Our Price: $141.27 each
|
Rear bearing, tapered. Fits Scout 80 with Dana 27 axles. Race is not included.
|
Our Price: $252.05 each
|
Pertronix Ignitor kit for Holley gold box ignition V8 systems.
Kit REPLACES THE PICKUP IN THE DISTRIBUTOR AND ELIMINATES THE GOLD BOX FROM THE IGNITION SYSTEM!!!
This kit will eliminate your gold box problems, increase fuel economy, horsepower, and plug life. Easy to install kit has no moving part
|
Our Price: $188.95 - $220.95 each
|
We are making all new reproductions of this axle bumper. No one else makes these or has them. This one has the correct bolt, correct thread, correct dimensions. This part was used on most IH trucks built from 1957 to 1968 and on Scout 80s and 800s.
New reproduction axle suspension stop of OEM #
|
Our Price: $30.85 each
|
This is the gasket between the side marker light housing and the body on 1971 to 1980 Scout II
|
Our Price: $4.53 each
|
Scout II trucks from 1978 on use these tail light housings with integrated lens. This lens accepts the original wiring pigtail. These are exactly like the originals, and will fit the stock wiring harness. This does NOT include the chrome bezel.
If your existing light sockets are damaged, see SP127
|
Our Price: $139.98 each
|
These are new replacement bulbs for Scout 800 instrument gauges.
|
Our Price: $1.26 each
|
Priced each. These are very nice reproductions of the forward body mounts (located near the front of of the front floorpan) used on Scout II. Goes under your feet as you drive down the road. The originals have typically rusted away or fatigued to the point they break or bend. Now you can get your
|
Our Price: $92.67 each
|
Passenger side fuel tank filler neck (hose) for Scout 80 and Scout 800 fuels tanks on the passenger side of the vehicle. This assembly includes the air vent hose, and connects the fuel tank to the filler flange on the rear fender.
See also the Drivers side
|
Our Price: $133.45 each
|
These are new plastic fan shrouds for Scout II. These are designed for use with V8 engines, and they will fit 4-cylinder motors too. These may or may not work with the inline engines (258, SD-33). If you have one of those engines, call us anyway to make sure.
|
Our Price: $202.77 each
|
Installation kit necessary for after market steering wheel use on a Scout II. Kit works with any of the three steering wheels that we carry.
Kit includes the adapter to the new steering wheel, the horn contacts, and plate, the mounting hardware, and detailed installation instructions.
|
Our Price: $81.95 each
|
All connectors are included. This is a new replacement wiring harness for the engine compartment of Scout II vehicles.
New wires will make your Scout II start and run reliably once more. Made from original IH blueprint specifications. Specific for Scout II 4, and 8 cylinders.
If you have a 6-cy
|
Our Price: $518.10 - $518.10 each
|
Hose connects the plastic or metal fuel filler neck to the fuel tank, and is a direct replacement for the original hose.
This is a nice, industrial, heavy duty hose. (Be careful of the heavy metal wires embedded in the tubing.)
|
Our Price: $38.40 each
|
Kit includes original type drain plug and drain plug washer for IH motors.
|
Our Price: $17.70 each
|
162815R1. This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.40 Each
|
The addition of brake calipers may necessitate your choosing a 16" diameter wheel on Scout 80 and 800. These glossy black steel wheels are an excellent alternative to having your new calipers scrape your old 15" wheels. These wheels also look great on a Scout II.
Here are the specs:
5 x 5.5" lug p
|
Our Price: $119.46 each
|
This aftermarket tie rod assembly replaces both the short and long tie rod ends in any Scout 80 or Scout 800 (for 1961-1971 Scouts) To use the high performace tie rod assembly in place of your old tie rod assembly you must change your drag link to a tie-rod style drag link (SP17221).
|
Our Price: $419.91 each
|
These are aftermarket rubber gaskets, sold in pairs to do 2 doors (2 small pieces, 2 large pieces). For 4 door trucks and Travelalls be sure to order two kits!
Scout 66-71 Scout 800 and 61-68 IH Pickup
(handle not included)
|
Our Price: $19.99 each
|
Foam gasket between the steel tail light housing and the body on early scout II's and D line pickups
|
Our Price: $9.08 each
|
Includes, housing, lens and LED lights and pigtail. This is an almost perfect fit. The screw holes are a match but the unseen recess may need to be trimmed 1/16"th with just a little bit of filing.
|
Our Price: $49.65 each
|
This cap will fit and look great on any Scout II, Scout 80/800, 50's and 60's IH Pickup / Travelall. You will love it.
|
Our Price: $27.81 each
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $19.89 each
| |
