SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.

Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|

Improve the ride and extend the life of your tires with new shock absorbers for your Scout! This is a gas-charged unit by Monroe, and comes with new powdercoat and new bushings. Eye to stud mounting pattern. See SP16193 for eye to eye pattern. For stock applications only.
|
Our Price: $59.03 each
|

We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $7.60 each
|

These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|

This part will connect a custom steering wheel to your old Scout. You will retain your horn as well as your turn signal cancel. IT WORKS! You cant get this anywhere else!
This is for a 1961-1971 Scout 80 or 800.
If you need this part for a Scout II, use SP16464
|
Our Price: $72.09 each
|

***Scout II top door seal special, proudly made in the USA*** Scout II door felt and squeegee for resealing the top of door opening of Scout II doors. These are the real deal, your windows won't rattle and will look original.
You will need 2 kits.
Outer 481437C1, 395872c1, 395873c1 - Inner 481437
|
Our Price: $72.37 each
|

New Scout II red side marker lens
Replaces IH part
507600c1
|
Our Price: $42.95 each
|

Water Temp Sender For Scout 2 With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old water temp sender with this new updated sender for the most accura
|
Our Price: $41.87 each
|

There are 14 screws and special washers here, which are enough screws to affix one Scout II door panel to the door.
|
Our Price: $22.34 each
|

Fuel Gas tank Selector switch for Scout 80-800, manual type.
Includes three fuel line connector fittings.
Switches tanks with a 90-degree swing instead of 180-degrees like the original.
|
Our Price: $102.39
|

For years we drove our Scouts without cup holders. One day we got tired of spilling coffee all over the seat and designed the floor mount cup holder.
The cup holder is made of heavy 18 gauge stainless steel (not at all flimsy), is laser cut, and is perfectly suited to mount in any Scout II without
|
Our Price: $49.95
|

This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $19.89 each
|

Kit includes original type drain plug and drain plug washer for IH motors.
|
Our Price: $17.70 each
|

This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|

Foam gasket between the steel tail light housing and the body on early scout II's and D line pickups
|
Our Price: $9.08 each
|

|
Our Price: $29.95 Each
|

This is a brand-new sill scuff plate for the side door thresholds on your Scout II. This is the metal plate that holds the weatherstrip down on the flange and protects it against tearing due to scuffing when you climb in and out of the vehicle.
These are brand new extruded aluminum with standard
|
Our Price: $149.74 each
|

Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|

Valve cover gasket for IH engines: 152, 196, 266, 304, 345, 392
All valve cover gaskets are made of cork. Rubber is no longer available.
Not sold in pairs. For V8 application, order 2
|
Our Price: $27.95 Each
|

"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|

If you have aftermarket wheels they may be thicker than the originals. These studs are 1-15/16 inch long compared to stock 1-5/8 inch long. If you need longer studs these may work for you.
#wheelbolt
|
Our Price: $7.89 each
|

Pertronix Ignitor kit for Holley gold box ignition V8 systems.
Kit REPLACES THE PICKUP IN THE DISTRIBUTOR AND ELIMINATES THE GOLD BOX FROM THE IGNITION SYSTEM!!!
This kit will eliminate your gold box problems, increase fuel economy, horsepower, and plug life. Easy to install kit has no moving part
|
Our Price: $188.95 - $220.95 each
|

New aftermarket round side view mirror. Same primitive design as the original, this mounts directly to the upper door hinges (there should be a threaded hole in the front surface of each hinge)..
-MIRROR HEAD ONLY-
|
Our Price: $133.45 EACH
|

***LIMITED QUANTITIES***SOLD EACH ******Very hard to find! New old stock trim moulding clips for Scout II.
YES, THERE ARE FOUR IN THE PHOTO. ALLOWING YOU TO SEE DIFFERENT ANGLES. YOU WILL ONLY RECEIVE ONE AT THIS PRICE. PRICED EACH.
|
Our Price: $38.93 EACH
|

This is a complete set of 9 new LED lights to replace your old incandescent bulbs. You know, the ones that seem to only burn out when you are giving a ride to your mother in-law that does not quite like you...yet.
SPEEDO:
2 Illumination LEDs
2 Turn Signal
1 4x4 Engage
1 E-brake
1 Brights
ALT/FUEL:
|
Our Price: $33.26 set of 9 bulbs and inserts/sockets
|

Super good, super strong, super resistant to gas, oil and diesel. Use gloves when applying. So good that it is hard to get off your hands.
This item has to ship ground because it's ORM-D, which makes the freight high to remote locations.
|
Our Price: $15.61 each
|

We now have brand new shifter knobs to fit Scout 80, Scout 800, and pickups and Travelalls. This was used on 3 and some 4-speed transmissions used in C, K, KB, M, L, R, S, A, B, and C-series trucks.
Made of phenolic rubber like the original, This has a 3/8" SAE (fine) thread. If this is not c
|
Our Price: $31.53 each
|

If you get your Scout out on some gravel and apply brake pressure you can determine if either the front or rear brakes are locking up too early. This adjustable proportioning valve allows you to fine tune the front to rear braking pressure.
|
Our Price: $67.72 each
|
|