SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
Holds your fuel tank in place. They are sold in pairs. The straps are 36" by 2" and come galvanized.
|
Our Price: $61.67 each
|
If your doors are hanging low and your hinges are just worn out, you can buy this kit and rebuild one door hinge. With this particular project, you may want to take it to a machine shop.
|
Our Price: $8.17 each
|
Brand new windshield seal for all years of Scout II, Scout II Terra, and Scout II Traveller. This seal is a direct replacement for the worn or leaking seal you may currently have; replacing a bad seal will keep the windshield frame from rusting.
This comes with a black locking strip but accepts a c
|
Our Price: $150.4 each
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $60.17 each
|
These are the original factory spring bushings to fit all Scout 80 & Scout 800 springs. 7/8" diameter. These will give your truck the ride it had when it was new.
You may need a press to install these. Check out SP12758 for aftermarket urethane spring bushings that are easier to install.
|
Our Price: $18.82 each
|
Hub and rotor for Scout II with front disc brakes (2WD & 4WD) and for 1974-75 4x4 pickups and Travelalls.
These come complete with new hubs, new discs, new studs, and new bearing races.
|
Our Price: $224.26 each
|
|
Our Price: $14.17 each
|
After market non-oem Stainless Steel head light bezel rings. Excellent restoration piece. 9.25" OD 7.25" ID.
APPLICATION DETAILS:
1961-71 Scout-very close to original look
1941-49 K/KB- Fit all models with close to original look
|
Our Price: $39.95 EACH
|
These are new O-rings for the water pipes that run between the water pump housing and the cylinder heads on International V8 and 4-cylinder engines.
On 392IC motors (Improved Cooling) motors, the water pipes go to the front of the block, but the O-ring is the same.
There are 4 provided per s
|
Our Price: $8.87 each
|
#25 in the above diagram is the part you are looking at
#24 is SP18769
#21 is SP10562
Door to body seal kit.
Applies to the body and the top of the Scout with glue (not included, ask). The door closes against the seal.
Includes upper and lower seals for both left and right doors.
Fits 1963-71 I
|
Our Price: $141.32 each
|
Rear Parking Brake Cable (Emergency Brake) This a rear parking brake cable for Scout II with a 100-inch wheelbase. Also called an e-brake.
Made in the USA
393953c92 1971-1978
|
Our Price: $184.02 each
|
Scout II amber side marker lens. Great replacement part for your restoration.
International Harvester Scout, binder, overland
507599c1
|
Our Price: $42.95 each
|
We have brand new gaskets to fit the front wheels hubs on Scout 80, Scout 800, Scout II, and the 1974 and 1975 pickups and Travelalls with 5-bolt wheels. This goes between the bearing hub and the locking hubs or hub drive flange, whichever the case may be.
|
Our Price: $6.6 each
|
Installation kit necessary for after market steering wheel use on a Scout II. Kit works with any of the three steering wheels that we carry.
Kit includes the adapter to the new steering wheel, the horn contacts, and plate, the mounting hardware, and detailed installation instructions.
|
Our Price: $102.87 each
|
Shifter boot for Scout II Automatic transmission. This boot will also work for Scout 800 A & B Single shifter transfer case.
431600c1
|
Our Price: $64.16 ea
|
***Scout II top door seal special, proudly made in the USA*** Scout II door felt and squeegee for resealing the top of door opening of Scout II doors. These are the real deal, your windows won't rattle and will look original.
You will need 2 kits.
481437C1, 395872c1, 395873c1 - Inner 481437c1, 39
|
Our Price: $72.37 each
|
This seal kit fits Dana 27, Dana 30, and Dana 44 closed-knuckle front axles used in Scout 80, 800, pickups, and Travelalls. This kit seals around the large ball behind the knuckle.
This kit comes with the rubber seal, felt seal, metal seal retainers, and retainer bolts. One kit is enough to servi
|
Our Price: $83.17 each
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $18.89 each
|
We now have brand new shifter knobs to fit Scout 80, Scout 800, and pickups and Travelalls. This was used on 3 and some 4-speed transmissions used in C, K, KB, M, L, R, S, A, B, and C-series trucks.
Made of phenolic rubber like the original, This has a 3/8" SAE (fine) thread. If this is not c
|
Our Price: $31.53 each
|
NOS Original Scout II automatic shift boot seal.
Please see our listing for a very nice reproduction SP12666
|
Our Price: $74.72 CALL FOR AVAILABILITY
|
This barrel clip fits a 1/8" stud and fits into a 11/64th hole, These are the little tiny guys that hold your emblems on in places were you do not have access to, like the back side of the sheet metal.
These were used on your tail gate of your scout to hold on the chrome "INTERNATIONAL".
, 28832
|
Our Price: $2.78 each
|
Brand new taillight lens for 1961-71 Scout 80 and 800, 1961-1969 IH Pickup and Travelall. Just like the original minus the IH logo in the center.
Sold Each
replaces 210610R91
Gaskets can be found on SP10539
|
Our Price: $21.95 Each
|
Replaces IH # 367568C1
Fits: 1969-70 Scout 800, 1971-80 Scout II, 1969-75 Pickup & Travelall, 1976-80 Traveler/Terra
soft cork material
|
Our Price: $7.95 Each
|
Tail light wiring harness (pigtail) for rear tail/brake bulb sockets.
|
Our Price: $32.95 each
|
Restoration quality bumper stand-off brackets. Attention to detail makes a good restoration great! ****Priced per offset****.
Made in the USA
|
Our Price: $111.47 EACH
|
This valve seat retains the valve spring. these are used on all IH 4 and 8 cylinder engines.
|
Our Price: $11.76 each
|
All of the gas motors in all models of Scout and Scout II use these Champion brand spark plugs. We typically gap spark plugs to .035 when installing, which is very close to the Champion factory gap.
|
Our Price: $5.41 each
| |
