SCOUTPARTS.COM stocks 1961-1980 International Harvester Scout 80, 800, 800A, 800B, Scout II, Terra and Traveler parts. We sell used Scout parts as well as common upgrades such as disc brake conversion kits, lift kits, fuel injection kits, offroad steering upgrades and roll bars. We're the best source for complete clutch kits, custom wiring harnesses, and gas tanks. We offer a full line of restoration and performance parts including Light Line original IH parts. We stock hard to find used, new and NOS (new old stock) parts. Both the Scout specialist and the new IHC enthusiast can count on us to find the Scout parts they need. As Scout owners, we drive Scouts and understand the needs of the 4x4 binder enthusiast and restoration customer alike. We have more parts listed on our site than anyone else on the internet and if we don't have it listed we can still probably get it. If you're looking for International Scout parts, you've found the right place.
Scoutparts.com gift certificates are the perfect gift for any
Scout enthusiast! Please call to order, we'll get one right
out to you. Can be used at Scoutparts.com, Travelallparts.com
|
|
This seal is made for the lower rear cab top. The original was poorly designed because it allowed the metal of the top to rub against the metal of the bulkhead in direct contact, destroying your paint. This is new and improved!
|
Our Price: $59.95 each
|
Easy to install - NO soldering MUST BE GROUNDED!
If your gauges are reading incorrectly or not at all, you may need this brand new high capacity solid state regulator kit. It replaces the old mechanical one behind your Oil/Temp gauge. NO MOVING PARTS! This regulator has a capacity far beyond the
|
Our Price: $60.17 each
|
This is a special glue to adhere weatherstripping to metal body parts, such as the metal lip around the doors, or around windows. This is also used to attach the free ends of weatherstrips when they come together, like the one that goes around the doors or tailgate. Black in color, this will blend
|
Our Price: $29 each
|
This is a new water pump and gasket. This pump will fit all 4-cylinder and IH V8 engines (152, 196, 266, 304, 345, 392). The hub is drilled with 8 holes; four of those holes are for the standard bolt-on fan, and the other holes allow attachment of the optional bolt-on fan clutch. No matter which
|
Our Price: $148.35 each
|
If you have aftermarket wheels they may be thicker than the originals. These studs are 1-15/16 inch long compared to stock 1-5/8 inch long. If you need longer studs these may work for you.
#wheelbolt
|
Our Price: $7.89 each
|
This fits all IH motors, including 152, 196, 266, 304, 345, and 392. Make those persistent oil leaks disappear!
Gaskets may come in cork or rubber, depending on availability.
Not sold in pairs
If you have a V8, order two
|
Our Price: $16.95 Each
|
|
Our Price: $49.16 each
|
This aftermarket tie rod assembly replaces both the short and long tie rod ends in any Scout 80 or Scout 800 (for 1961-1971 Scouts) To use the high performace tie rod assembly in place of your old tie rod assembly you must change your drag link to a tie-rod style drag link (SP17221).
|
Our Price: $419.91 each
|
"O" ring, for water pipes on all IH engines .
|
Our Price: $2.97 each
|
Fuel sender gasket o-ring for original steel fuel tanks. If you have an aftermarket polyethylene tank, you need SP19180.
|
Our Price: $7.08 each
|
Front Suspension Axle Stop Bumper Rubber
|
Our Price: $20.92 each
|
Oil Pressure Sender For Scout II With Stainless Steel Dash Panel and New Gauge Combo Kit. If you have recently purchased our Stainless Steel Dash Panel and New Gauge combo kit "SP13689" you are going to want to replace your 30 year old oil sender with this new updated sender for the most accurate r
|
Our Price: $52.89 each
|
We've put this kit together for your IH Scout II to seal up the rear of your rig!
Includes :
-- Lower tailgate seal (the weather-strip under the tailgate)
-- Side tailgate seals (two vertical seals on the two sides of your tailgate, if you take your top off)
-- Upper liftgate seal (the seal at t
|
Our Price: $102.79 each
|
2753948r1. Fits: 1966-1971 Scout 800, 800A, 800B
Die cast design like the original
Chrome plates and textured on the inside
Includes retaining clips
|
Our Price: $48.9
|
This is a replacement screw for your door striker plate. That is the plate that is screwed to the body. It receives the door when you close it. Many people have problems with their doors not closing right and they just keep slamming them harder and harder.
These replacement screws are longer, which
|
Our Price: $3.89 each
|
Kit includes 2 high quality heavy duty shackles and hardware necessary to mount them on either the front or rear springs of any Scout 80 or Scout 800. Purchase 2 kits if you want to do both front and rear.
These shackles are an excellent way to get some extra tire clearance or accomodate lift spri
|
Our Price: $144.74 - $144.74 each
|
These are fabulous reproductions! 495512C2
Scout II, Scout Terra, Scout Traveler
|
Our Price: $128.17 each
|
***International Harvester Scout 80/800 hood bumpers available again ***
This hood bumper is made by Scoutparts for the International Harvester Scout 80 & 800. This bumper is an accurate reproduction of the original hood bumper that was used by International.
Made in the USA
Our Price: $13.55 In stock now!
|
This kit includes the two hoses that connect the defroster vents in your truck.
|
Our Price: $39.95 each
|
This is a brand-new sill scuff plate for the side door thresholds on your Scout II. This is the metal plate that holds the weatherstrip down on the flange and protects it against tearing due to scuffing when you climb in and out of the vehicle.
These are brand new extruded aluminum with standard
|
Our Price: $78.74 each
|
White plastic door seal retainers. Used on all Scouts of all years.
|
Our Price: $0.9 each
|
These hose clamps are made of stainless steel, so they will never rust.
|
Our Price: $2.24 each
|
This is the donut (metal and fiber ring gasket) for the exhaust pipe-exhaust manifold flange connection. This fits either the 3-bolt manifold or the 2-bolt manifold.
If you have a V8, you will need two. If you have a 4-cylinder, you will need only one.
If you have a heat riser valve, there is also
|
Our Price: $18.89 each
|
Fits: 1971-77 Scout II & Terra/Traveler
Includes: 4 screws and 4 well nuts, enough to mount both of your rear arm rests
2 of each required per arm rest
|
Our Price: $14.95 Each
|
This is a plastic Sheet metal screw nut used in IH head lights, like head light bezels. Also can hold your head light bezel on to your grille.
Fits a #6 Screw and a 5/16" square hole
|
Our Price: $1.48 each
|
This brand new steering column to firewall seal has been made to the exact specifications used for the original seals.
|
Our Price: $35.4 each
|
We only have three. New Old Stock.
This is the best side view mirror to use for your Scout II. New old stock mirror made by IH in the 1970's. This is the replacement mirror that your IH dealer would have sold you in 1970's.
- Mounting holes may need to be re-drilled -
|
Our Price: $742.99 EACH
| |
